Service Parts List

PEX PRESS JAW ASSEMBLIES for the 2674-22P
ITEM PART NUMBER DESCRIPTION OF PART NO.REQ.
30 49-16-2634P 1” Pex Press Jaw Assembly 1
31 49-16-2633P 3/4” Pex Press Jaw Assembly 1
32 49-16-2632P 5/8” Pex Press Jaw Assembly 1
33 49-16-2631P 1/2” Pex Press Jaw Assembly 1
34 49-16-2630P 3/8” Pex Press Jaw Assembly 1
1A 44-86-0026 Retaining Ring 4
1B --------------- Pivot Pin 2
1C --------------- Jaw Side Plate 2
1D --------------- Jaw Transfer Pin 1
1E --------------- Leaf Spring 1
1F --------------- 1” Pex Press Jaw 2
1F --------------- 3/4” Pex Press Jaw 2
1F --------------- 5/8” Pex Press Jaw 2
1F --------------- 1/2” Pex Press Jaw 2
1F --------------- 3/8” Pex Press Jaw 2
1G --------------- Jaw Clip With Orange For 1” Pex Press Jaw 2
1G --------------- Jaw Clip With Blue For 3/4” Pex Press Jaw 2
1G --------------- Jaw Clip With Red For 5/8” Pex Press Jaw 2
1G --------------- Jaw Clip With Yellow For 1/2” Pex Press Jaw 2
1G --------------- Jaw Clip With Green For 3/8” Pex Press Jaw 2
0.15mm and 0.20mm Jaw Shims
are factory installed as needed.
When disassembling the Jaw Assembly to lubricate, be sure
to replace the shims to the same position when reassem-
bling.
1a
(4x)
1b
(2x)
1c
(2x)
1d
1f
(2x)
1g
(2x)
1e
A
B
B
C
C
PEX CRIMP JAW ASSEMBLIES for the 2674-22C
ITEM PART NUMBER DESCRIPTION OF PART NO.REQ.
35 49-16-2634C 1” Pex Crimp Jaw Assembly 1
36 49-16-2633C 3/4” Pex Crimp Jaw Assembly 1
37 49-16-2632C 5/8” Pex Crimp Jaw Assembly 1
38 49-16-2631C 1/2” Pex Crimp Jaw Assembly 1
39 49-16-2630C 3/8” Pex Crimp Jaw Assembly 1
1A 44-86-0026 Retaining Ring 4
1B --------------- Pivot Pin 2
1C --------------- Jaw Side Plate 2
1D --------------- Jaw Transfer Pin 1
1E --------------- Leaf Spring 1
1H --------------- 1” Pex Crimp Jaw 2
1H --------------- 3/4” Pex Crimp Jaw 2
1H --------------- 5/8” Pex Crimp Jaw 2
1H --------------- 1/2” Pex Crimp Jaw 2
1H --------------- 3/8” Pex Crimp Jaw 2
1J --------------- Jaw Clip With Orange For 1” Pex Crimp Jaw 2
1J --------------- Jaw Clip With Blue For 3/4” Pex Crimp Jaw 2
1J --------------- Jaw Clip With Red For 5/8” Pex Crimp Jaw 2
1J --------------- Jaw Clip With Yellow For 1/2” Pex Crimp Jaw 2
1J --------------- Jaw Clip With Green For 3/8” Pex Crimp Jaw 2
1a
(4x)
1b
(2x)
1c
(2x)
1d
1h
(2x)
1j
(2x)
1e
A
B
B
C
C
LUBRICATION:
Type S2 Grease (7 oz. tube), No. 49-08-5265
A Place a light, uniform coat of grease around the entire jaw transfer pin (1d).
B Lightly coat with grease the ID of pivot pin holes of both press jaws (1f & 1h).
  Besuretoplacealightlmofgreaseontheangesurfacesofbothpressjaws
(1f & 1h) that contact the side plates (1c).
C Lightly coat with grease the ID of pivot pin holes of the jaw side plates (1c).
D Apply a light coat of grease to the clevis assembly (2a) as shown.
Apply a light coat of grease to both rollers (2h) and the roller contact surfaces
on the roller carrier (2j).
D
D
D
3h
3j
3h
Clevis Assy.