Service Parts List

Due to the mechanical design and electronics in this tool,

service can only be performed at this Milwaukee factory Repair Center:

MILWAUKEE TOOL Central Repair

1401 Sycamore Avenue

Greenwood, MS 38930-7277

Please send your tool directly to this location for service.

Via e-Service at: www.milwaukeetool.com/e-service

questions, please call 1.800.SAWDUST (1.800.729.3878)

Return it to a MILWAUKEE factory Service Center location, freight prepaid and insured.

A copy of the proof of purchase should be included with the return product.

If you have questions please contact Milwaukee Product Service at:

Product Technical Support via phone at: 262.783.8642

Via email at: METProductSupport @milwaukeetool.com

Disassembly is not recommended and could void the warranty.

2674-20

M18™ PEX Press/Crimper

Oct. 2019

54-00-PXPC

REVISED BULLETIN

SERVICE PARTS LIST

BULLETIN NO.

WIRING INSTRUCTION

DATE

CATALOG NO.

SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS

SERIAL

NUMBER

Drwg. 2

H14A

See page 2 for available Jaw Assemblies

and lubrication / maintenance

PAGE 1
BULLETIN NO. SERVICE PARTS LIST 54-00-PXPC SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS M18™ PEX Press/Crimper CATALOG NO. 2674-20 SERIAL NUMBER H14A REVISED BULLETIN DATE Oct.
PAGE 2
LUBRICATION: Type S2 Grease (7 oz. tube), No. 49-08-5265 A Place a light, uniform coat of grease around the entire jaw transfer pin (1d). D D Apply a light coat of grease to the clevis assembly (2a) as shown. Apply a light coat of grease to both rollers (2h) and the roller contact surfaces on the roller carrier (2j).