Service Parts List

44 3 2
75 74 73 72 18
41
40
39
7
36
37
38
2
29
30
31
28
10
13
12
11
9
8
42
43
4
1
27
33
32
22
23
24
15
14
21
6
21 22
23 24
20
27 28 29 30
31 32 33
25
27
28
26
36 37 38
39 40
34
6
7
5
8 9 10
11 12 13
17
Soldered
L
Screwed
#77 two styles of
Brush Card Assemblies
See Page Two
77
19
76
76
72 73
74 75
19
FIG. PART NO. DESCRIPTION OF PART NO. REQ.
1 05-88-1210 M4 x 14 T-20 Screw (4)
2 05-88-1200 M4 x 16 T-20 Screw (9)
3 06-82-7236 4-20 x 5/8" Pan Hd. Plast. T-10 Screw (1)
4 05-90-0225 Split Washer (4)
5 14-34-0900 Handle Kit (1)
6 --------------- Right Handle Halve (1)
7 --------------- Left Handle Halve (1)
8 --------------- Spindle Shaft (1)
9 --------------- Spindle Hub (1)
10 34-40-0560 O-Ring (1)
FIG. PART NO. DESCRIPTION OF PART NO. REQ.
11 --------------- Ball Bearing (1)
12 34-80-2275 Internal Snap Ring (1)
13 --------------- Gear (1)
14 40-50-1090 Spring (1)
15 22-09-1350 Electronics Module Assembly (1)
17 32-05-0120 Spindle Shaft/Gear Assembly (1)
18 23-66-2875 Switch Assembly (1)
19 --------------- Brush Card (1)
20 31-92-0530 Paddle Trigger Assembly (1)
21 --------------- Paddle Trigger (1)
22 42-42-0620 Lock-Off Lever (1)
23 40-50-1480 Spring (1)
24 06-65-0450 Roll Pin (1)
25 14-30-0850 Gearcase Kit (1)
26 28-14-2450 Gearcase Assembly (1)
27 --------------- Gearcase (1)
28 --------------- Needle Bearing (1)
29 42-42-1100 Spindle Lock Button (1)
30 40-50-1330 Spring (1)
31 42-42-0580 Spindle Lock Tube (1)
32 44-60-1690 Spindle Lock Pin (1)
33 34-40-0450 O-Ring (1)
34 16-01-0060 Armature Assembly (1)
36 --------------- Bearing Retainer (1)
37 --------------- Ball Bearing (1)
38 --------------- Pinion (1)
39 45-36-2040 Armature Spacer (3)
40 02-04-1875 Ball Bearing (1)
41 18-01-3025 Service Field (1)
42 43-34-0036 Disk Flange (1)
43 44-40-0035 Flange Nut (1)
44 12-20-2490 Service Nameplate Kit (1)
60 43-54-1070 4.5" T27 Guard Assembly (1)
61 43-54-1090 4.5" T1 Guard Assembly (1)
72 05-88-0928 M3 x 5mmPan Hd. T10 Screw (2)
73 45-88-1980 Spring Washer (2)
74 --------------- Leadwire Assembly - Red (1)
75 --------------- Leadwire Assembly - Black (1)
76 14-46-2396 Leadwire/Screw/Washer Kit (1)
77 14-46-2014 Brush Card Assembly (1)
42-62-0105 Side Handle (Not Shown) (1)
49-96-7215 Spanner Wrench (Not Shown) (1)
CORDLESS 18 VOLT 4-1/2" CUT-OFF/GRINDER
2680-20
B96B
54-38-2681
SEE PAGE 3
Aug. 2014
REVISED BULLETIN
SERVICE PARTS LIST
BULLETIN NO.
WIRING INSTRUCTION
DATE
SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS
CATALOG NO.
MILWAUKEE ELECTRIC TOOL CORPORATION
13135 W. LISBON RD., BROOKFIELD, WI 53005
Drwg. 2
STARTING
SERIAL NO.
0
00
EXAMPLE:
Component Parts (Small #) Are Included
When Ordering The Assembly (Large #).
FIG. LUBRICATION:
(Use Type 'Y' grease, No. 49-08-5270)
10 Apply a thin coat of grease to the
Spindle Hub O-Ring.
13,38 Apply grease to all teeth of the
Pinion and Gear.
27 Place 1/8 oz. grease in Gearcase
cavity.
32,33 Apply a thin coat of grease between
Spindle Lock Shaft and O-Ring.
60
61
FIG. NOTES:
28 Assemble Needle Bearing with
vendor I.D. facing the Gear.
37 Assemble Ball Bearing with seal
towards Pinion and shield towards
Armature.
Functionally check the Spindle Lock
mechanism. Spindle Lock must
return briskly when released
from engagement in
Gear (13).
54-38-2680
= Part number change from
previous service parts list.

