Service Parts List

ManualsBrandsMilwaukee ManualsDrillsM18 FUEL ONE-KEY 18-Volt Lithium-Ion Brushless Cordless 1-3/4 in. SDS-MAX Rotary Hammer with One 12.0 Ah Battery

Service for the ELECTRONICS on

Milwaukee Tool ONE KEY Products

can only be performed at this

Milwaukee factory Central Repair Center:

MILWAUKEE TOOL Central Repair

1401 Sycamore Avenue

Greenwood, MS 38930-7277

Please send your tool directly to this location for service.

Via e-Service at: www.milwaukeetool.com/e-service

questions, please call 1.800.SAWDUST (1.800.729.3878)

Return it to a MILWAUKEE factory Service Center location, freight prepaid and insured.

A copy of the proof of purchase should be included with the return product.

If you have questions please contact Milwaukee Product Service at:

Product Technical Support via phone at: 262.783.8642

Via email at: METProductSupport @milwaukeetool.com

Disassembly is not recommended and could void the warranty.

2718-20

M18™ FUEL™ 1-3/4” SDS-Max Rotary Hammer with One-Key

Oct. 2019

54-00-2718

REVISED BULLETIN

SERVICE PARTS LIST

BULLETIN NO.

WIRING INSTRUCTION

DATE

CATALOG NO.

SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS

SERIAL

NUMBER

Drwg. 2

J97A

LUBRICATION INSTRUCTIONS PAGE 4

EXTERNAL SERVICE PARTS PAGE 2 & 3

WIRING INSTRUCTIONS PAGE 5

Summary of content (5 pages)

PAGE 1
BULLETIN NO. SERVICE PARTS LIST 54-00-2718 SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS REVISED BULLETIN M18™ FUEL™ 1-3/4” SDS-Max Rotary Hammer with One-Key CATALOG NO. 2718-20 EXTERNAL SERVICE PARTS PAGE 2 & 3 LUBRICATION INSTRUCTIONS PAGE 4 WIRING INSTRUCTIONS PAGE 5 SERIAL NUMBER J97A DATE Oct.
PAGE 2
BULLETIN NO. SERVICE PARTS LIST 54-00-2718 SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS REVISED BULLETIN M18™ FUEL™ 1-3/4” SDS-Max Rotary Hammer with One-Key™ CATALOG NO. 00 EXAMPLE: 0 Component Parts (Small #) Are Included When Ordering The Assembly (Large #).
PAGE 3
9j 39h FIG. 23 24 25 26 27 28 29 30 31 32 32a 32b 32c 33 34 35 36 36a 36b 37 37a 37b 37c 38 39 39a 39b 39c 39d 39e 39f 39 39a 39g 39h 39j 39k 40 41 41 38 (6x) 39g 40 39f 39e 39a 39c 37b 37 37a 37c 37c 39k 39d 37b 39b 36b 37a 36a 36 36a 36b 35 32a 32 19b 32b 32c 34 32c 32a 33 28 25 27 26 15 14d 14c 19b 30 14a (Back side) 14a 24 29 24 23 l= Component of the 14-46-2718 Service Maintenance Kit PART NO.
PAGE 4
Lubrication Note: MILWAUKEE recommends that scheduled maintenance of this Rotary Hammer include lubrication replacement, and replacement of vital O-rings and gaskets at each carbon brush change. Doing so will prolong the life of the hammer by reducing wear to gears and mechanism parts. The carbon brushes and armature commutator in this MILWAUKEE Rotary Hammer are designed and matched for many hours of reliable performance. 1. Place washer #20 onto backside of barrel. 2.
PAGE 5
ELECTRICAL SPECIFICATIONS Handle and Base Cutaway Model 2718-20 Cordless Rotary Hammer shown Trigger Switch (Red and yellow terminals connect to this Switch from Control Board) Bluetooth (PCBA) Board Block Motor Insulator Assembly encasing Hall Board and Stator Power Board LED Assembly Battery Terminal Block Route wires down into the Housing Support (1). Be sure all parts are firmly seated in corresponding cavities. Push wires and sleeve assemblies firmly down into wire traps as shown.