Use and Care Manual

3
BATTERY PACK USE AND CARE
• Remove the battery pack from the power tool
before making any adjustments, changing ac-
cessories, storing, or any time the power tool is
not in use. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
•Turn off power tool before removing battery
pack.
• Do not handle battery pack, tool, or charger
(including charger plug and terminals) with wet
hands.
•Before using the battery pack or charger read
the operator’s manuals, and any labels on the
battery pack, charger and tool.
•Recharge only with the charger specied by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of re when used
with another battery pack.
• Use tool only with specically designated bat-
tery packs. Use of any other battery packs may
create a risk of injury and re.
• When battery pack is not in use, keep it away
from other metal objects like paper clips, coins,
keys, nails, screws, or other small metal objects
that can make a connection from one terminal
to another. Shorting the battery terminals together
may cause burns or a re.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
cidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns. It may be toxic if swallowed.
• Do not use damaged battery pack or tool. If battery
pack or appliance are not working as they should,
have been dropped, damaged, left outdoors, or
dropped into water, return them to a service center.
• Do not expose a battery pack or tool to re or
excessive temperature. Exposure to re or tem-
perature above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specied in the instructions. Charging
improperly or at temperatures outside the specied
range may damage the battery and increase the risk
of re.
SERVICE
• Have your power tool serviced by a qualied
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
•Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
READ AND SAVE ALL
INSTRUCTIONS FOR
FUTURE USE
FUNCTIONAL DESCRIPTION
1. Variable speed trigger lock
2. Trigger
3. Handle
4. Air intake vent
5. Tube latch
6. Tube
6
3
2
4
1
5
SPECIFICATIONS
Cat. No. ..................................................... 2728-20
Volts.............................................................. 18 DC
Battery Type .................................................M18™
Charger Type................................................M18™
No Load RPM ...............................................13 350
SYMBOLOGY
Volts
Direct Current
No Load Revolutions per Minute (RPM)
Safety Alert Symbol
Read Operator's Manual
Always wear eye protection, hearing
protection, and protective clothing
and footwear.
Do not use in rain or wet locations.
Electric shock could occur.
mini mum
50' / 15m
Keep bystanders 50' away during use
Do not point tool at self or bystanders.
Objects may be thrown or ricochet in
all directions.
Do not put hands or objects into
openings. Laceration can occur.
Keep hair contained. It can be pulled
into moving parts.
Do not wear loose clothing or jewelry.
It can be pulled into moving parts.
C
US
UL Listing for Canada and U.S.