Use and Care Manual
5
29
27
28
26
23
25
30
39
38
40
37
24
33
32
31
34
35
23. Trigger
24. Trigger lock
25. Cut-line indicator switch
26. Handle
27. Depth stop adjustment knob
28. Bevel adjustment lever
29. Dust chute
30. Dust bag
31. Slide rail transport lock
32. Kickstand
33. Hand stop
34. Workpiece clamp sockets (2)
35. Wrench storage
36. 6 mm Hex Wrench (not shown)
37. Chop lock lever
38. Depth stop lever
39. Spindle lock
40. Light
SYMBOLOGY
Volts
Direct Current
No Load Revolutions per Minute (RPM)
No Hands Zone - Keep hands out of
the No Hands Zone at all times during
use. Contact with blade will result in
serious injury.
C
US
UL Listing for Canada and U.S.
SPECIFICATIONS
Cat. No. ..................................................... 2734-20
Volts.............................................................. 18 DC
Battery Type .................................................M18™
Charger Type................................................M18™
Recommended Ambient
Operating Temperature ..................... 0°F to 125°F
No Load RPM ..................................................4000
Arbor Size ......................................................... 5/8"
Blade Size ......................................................... 10"
Blade Thickness (Kerf) ............................. Max 1/8"
Weight ..........................................................45 lbs.
CAPACITIES
Miter Cuts
Max Height at 90
o
....................5.71" H at 1.54" W
Max Height at 45
o
Miter Left..................5.71" H at 1.0" W Left Side
.............. 5.71" H at 1.22" W Right Side
Miter Right .............5.71" H at 1.31" W Left Side
.............. 3.59" H at 8.08" W Right Side
Max Width at 90
o
................... 11.39" W at 3.59" H
Max Width at 45
o
.....................8.08" W at 3.59" H
Compound Cuts .............. 45
o
Miter and 45
o
Bevel
Left ..........................................8.08" W at 2.02" H
Right ........................................8.08" W at 1.49" H
Groove Cuts Max Depth...............................2.5" H