Milwaukee M18 FUEL ONE-KEY 18-Volt Lithium-Ion Brushless Cordless 8-1/4 in. Table Saw W/ Jig Saw (Tool-Only) : Use and Care Manual : Page 7

SCREW TORQUE SPECIFICATIONS

SEAT TORQUE

FIG. PART NO. DESCRIPTION OF FASTENER WHERE USED (KG/CM) (IN/LBS)

TABLE TOP and RAIL ASSEMBLIES

47 06-55-0005 M10 Hex Nut with Nylon Fence Pinion Knob 30-35 26-30

52 06-82-0072 M5 x 20mm Pan Hd. Sems T-25 Nylok Screw Fence Pinion Bushing Bracket 32-36 27-31

63 06-82-0074 M5 x 13mm Pan Hd. Sems T-25 Nylok Screw Clamping Plate 32-36 27-31

65 06-55-0011 M6 Hex Nut Latching Adjustment Shaft 80-85 69-73

71 06-55-0006 M5 Hex Nut with Nylon Fence Lock Handle 13-18 11-15

89 06-75-0011 M6 x 8mm Pan Hd. Washer Screw, S4 Fence Length Indicator 10-15 8-13

90 06-75-0022 M6 x 6mm CWH Machine Screw, S4 Sliding Fence Rail 28-32 24-27

92 05-89-0010 M4 x 14mm PWH T-20 Taptite Screw Throat Plate Cam 22-26 19-22

FRAME and PANEL ASSEMBLIES

9 --------------- M4 x 18mm Pan Hd. ST T-20 Screw Battery Housing Mount-Left 10-15 8-13

43 05-81-0022 M4 x 10mm Pan Hd. ST T-20 Screw Battery Plate 12-15 10-13

71 06-55-0006 M5 Hex Nut with Nylon Tool-Less Lever 15-20 13-16

154 --------------- M4 x 13.5mm Pan Hd. ST T-20 Screw Handle Halve B 9-11 7-9

158 05-89-0011 M6 x 11mm Cap Hd. Machine Screw, S5 Frame 55-60 47-52

160 06-82-0093 M5 x 8mm Pan Hd. Taptite T-25 Screw Miter Gage Clip 15-20 13-16

160 06-82-0093 M5 x 8mm Pan Hd. Taptite T-25 Screw Electronic Cover 8-12 7-10

160 06-82-0093 M5 x 8mm Pan Hd. Taptite T-25 Screw Relay Carrier 20-25 16-21

166 --------------- M4 x 6mm Pan Hd. Taptite T-20 Screw Foot Cover 15-20 13-16

170 06-82-0096 M5 x 13mm Pan Hd. T-25 Machine Screw Bevel Plate, Battery Plate 35-40 30-34

170 06-82-0096 M5 x 13mm Pan Hd. T-25 Machine Screw Side Cover Panel 7-9 6-7

171 06-82-0098 M5 x 10mm Pan Hd. ST T-20 Screw Switch Panel, Bevel Adjustment Cam 7-9 6-7

174 06-82-0101 M5 x 8mm Cap Washer Head Screw, S4 Front Cover Panel 80-85 69-73

181 06-82-0103 M3 x 6mm ST Screw Switch Panel 4-5 3-4

189 06-82-0106 M3 x 10mm Pan Hd. ST T-10 Screw Switch Panel 4-5 3-4

DUST COLLECTION ASSEMBLY

52 06-82-0072 M5 x 20mm Pan Hd. Sems T-25 Screw Height Adjustment Shafts 35-40 30-34

181 06-82-0103 M3 x 6mm ST Screw Cloth Dust Cover-2 6-7 5-6

191 06-82-0108 M5 x 10mm Pan Hd. T-25 Machine Screw Cloth Dust Cover-2 14-17 12-14

191 06-82-0108 M5 x 10mm Pan Hd. T-25 Machine Screw Front Dust Cover 8-10 7-8

191 06-82-0108 M5 x 10mm Pan Hd. T-25 Machine Screw Bevel Indicator 20-25 16-21

191 06-82-0108 M5 x 10mm Pan Hd. T-25 Machine Screw Cloth Dust Cover-1 20-25 16-21

191 06-82-0108 M5 x 10mm Pan Hd. T-25 Machine Screw Back Dust Cover 30-34 26-29

193 05-89-0012 M6 x 13mmCH Machine Screw, S5 Height Adjustment Knob 20-25 16-21

194 06-55-0008 M8 Hex Nut with Nylon Height Adjustment Disk 20-25 16-21

197 06-55-0012 M6 Hex Nut with Nylon Height Adjustment Bevel Gears 1 & 2 20-26 16-22

207 06-75-0027 M5 x 24mm Cap Hd. Sems Screw, S4 Height Adjustment Block 35-40 30-34

211 06-82-0111 M5 x 10mm Pan Hd. T-25 Sems Screw Cloth Dust Cover-2 14-17 12-14

211 06-82-0111 M5 x 10mm Pan Hd. T-25 Sems Screw Height Adjustment Screw 20-26 16-22

214 06-82-0113 M4 x 12mm Pan Hd. T-20 Machine Screw Riving Knive Dust Cover 6-7 5-6

217 06-82-0107 M6 x 14mm Pan Hd. T-25 Machine Screw Front & Back Bevel Mechanism Assemblies 65-70 56-60

221 06-75-0031 M6 x 21.5mm Cap Hd. Sems, S5 Front & Back Bevel Mechanism Assemblies 90-100 78-86

225 06-82-0109 M5 x 13mm Pan Hd. Sems T-25 Screw Bevel Handle 20-25 16-21

228 05-77-0011 M10 x 25mm Hex Machine Screw, M5 Dust Collection Casting 40-43 34-37

234 05-77-0012 M5 x 16mm Wing Screw Dust Collection Cover 8-10 7-8

235 06-75-0029 M5 x 18mm Cap hd. Machine Screw, S4 Dust Collection Casting 8-10 7-8

GEARCASE and MOTOR ASSEMBLIES

100 --------------- M4 x 8mm Pan Hd. T-20 Sems Screw Bowed Retainer 25-33 21-28

101 --------------- Stem Bowed Retainer 28-32 24-27

102 --------------- M5 x 16mm Cap Hd. Machine Screw, S4 Bowed Retainer 30-36 26-31

103 --------------- M4 x 22.5mm Cap Hd. Machine Screw, S4 Bowed Retainer 20-25 16-21

112 06-82-0076 M5 x 13mm Pan Hd. T-25 Machine Screw Blade Change Outer Plate 40-45 34-39

115 06-82-0078 M5 x 20mm Pan Hd. T-25 Machine Screw Gearcase Bearing Plate 35-40 30-34

117 06-55-0007 5/8-18 UNF RH Hex Nut Blade Shaft 100-110 86-95

135 06-82-0081 M5 x 15mm Pan Hd. T-25 Machine Screw Motor Bearing Plate 35-40 30-34

135 06-82-0081 M5 x 15mm Pan Hd. T-25 Machine Screw PCBA 15-18 13-15

 137 --------------- M4.5x22mmPanHd.T-20Screw  FanBa󰀪e,Stator 22-28   19-24

142 06-82-0083 M3.5 x 14mm Pan Hd. ST T-10 Screw Top Motor Cover 8-10 7-8

144 06-82-0087 M4.5 x 14mm Pan Hd. ST T-20 Screw Motor Housing 8-12 7-10

149 06-82-0089 M2.6 x 6mm Pan Hd. ST Phillips Screw One-Key Battery Cover 2.5-3.5 2-3

TABLE SAW ATTACHMENTS and ACCESSORIES

1 --------------- M4 x 12mm Pan Hd. ST T-20 Screw Left Blade Guard Wing 10-11 8-9

3 --------------- M4 x 12mm Pan Hd. ST T-20 Screw Left Blade Guard Wing 10-11 8-9

9 --------------- M4 x 18mm Pan Hd. ST T-20 Screw Blade Guard Base-Left 10-15 8-13

14 06-82-0056 M4 x 8mm Pan Hd. T-20 Machine Screw Miter Gauge Indicator 15-18 13-15

14 06-82-0056 M4 x 8mm Pan Hd. T-20 Machine Screw Anti-Kickback Pawl Bracket-Right Side 15-18 13-15

14 06-82-0056 M4 x 8mm Pan Hd. T-20 Machine Screw Push Stick Attachment Spring & Bracket 10-14 8-12

36 05-81-0018 M4 x 10mm Pan Hd. Taptite T-25 Screw Press Spring Bracket, Fence Latching Caps 14-18 12-15

41 05-81-0019 M5 x 13mm Pan Washer Hd. T-25 Screw Primary Fence Extrusion, Fence Bracket 36-40 31-34

42 05-81-0021 M5 x 4mm Pan Hd. T-20 Machine Screw Secondary Fence Bracket 18-23 15-19

43 05-81-0022 M4 x 10mm Pan Hd. Taptite T-20 Screw Secondary Fence Bracket & Extrusion 18-23 15-19

92 05-89-0010 M4 x 14mm Pan Washer Hd. T-20 Screw Throat Plate Cam 22-26 19-22

181 06-82-0103 M3 x 6mm ST Screw Miter Gauge Extrusion 4-6 3-5

7