Use and Care Manual

ManualsBrandsMilwaukee ManualsPower ToolsM18 FUEL ONE-KEY 18-Volt Lithium-Ion Brushless Cordless 8-1/4 in. Table Saw (Tool-Only)

Electronics Servicing for Milwaukee Electric Tool ONE KEY Products

can only be performed at this

Milwaukee factory Central Repair Center:

MILWAUKEE ELECTRIC TOOL Central Repair

1013 Sycamore Avenue

Greenwood, MS 38930-7277

Please send your tool directly to this location for service.

Via e-Service at: www.milwaukeetool.com/e-service

questions, please call 1.800.SAWDUST (1.800.729.3878)

Return it to a MILWAUKEE factory Service Center location, freight prepaid and insured.

A copy of the proof of purchase should be included with the return product.

If you have questions please contact Milwaukee Product Service at:

Product Technical Support via phone at: 262.783.8642

Via email at: METProductSupport @milwaukeetool.com

Disassembly of electronics package is not recommended and could void the warranty.

2736-20

M18™ FUEL™ ONE KEY 8.25" TABLE SAW

Sept. 2018

54-00-2736

REVISED BULLETIN

SERVICE PARTS LIST

BULLETIN NO.

WIRING INSTRUCTION

DATE

CATALOG NO.

SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS

SERIAL

NUMBER

Drwg. 1

J35A

TABLE TOP and RAIL ASSY. Page 2

FRAME and PANEL ASSY. Page 3

DUST COLLECTION ASSY. Page 4

GEARCASE and MOTOR ASSY. Page 5

ATTACHMENTS/ACCESSORIES Page 6

TORQUE SPECIFICATIONS Page 7

Summary of content (7 pages)

PAGE 1
BULLETIN NO. SERVICE PARTS LIST 54-00-2736 SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS M18™ FUEL™ ONE KEY 8.25" TABLE SAW CATALOG NO. TABLE TOP and RAIL ASSY. Page 2 FRAME and PANEL ASSY. Page 3 DUST COLLECTION ASSY. Page 4 2736-20 SERIAL NUMBER J35A REVISED BULLETIN DATE Sept. 2018 WIRING INSTRUCTION GEARCASE and MOTOR ASSY.
PAGE 2
TABLE TOP and RAIL ASSEMBLY 95 (4x) Apply a drop of Red Loctite® 277 to threads of screw prior to installation 82 90 (6x) 88 (7) 249 96 99 98 257 256 00 270 91 96 94 92 93 94 95 98 99 256 257 266 84 85 93 91 EXAMPLE: 0 Component Parts (Small #) Are Included When Ordering The Assembly (Large #). 92 81 85 63 (4x) (8x) Both sides of pinion shaft 89 87 86 (2x) 53 57 (2x) (2x) LUBRICATION = 277 Red Loctite,® 44-22-0325 FIG.
PAGE 3
FRAME and PANEL ASSEMBLY 170 (4x) 160 (2x) 170 (3x) 169 173 (2x) 174 (2x) 185 168 188 186 171 (4x) 190 254 189 (2x) 175 172 43 178 251 153 279 152 154 152 153 177 154 (2x) 155 (4x) 156 (4x) 187 160 (2x) 157 (4x) 158 (4x) 161 184 163 (2x) 183 182 181 (2x) 164 (2x) 171 (6x) 180 179 9 (5x) 176 160 (3x) 9 179 278 180 71 (2x) 162 166 (8x) 280 3 165 166 167 167 (2x) 252 165 (2x) 159 FIG.
PAGE 4
211 DUST COLLECTION ASSEMBLY 210 181 191 (5x) 253 192 196 195 67 197 193 157 281 194 191 (3x) 67 198 52 (4x) 207 (2x) 209 (2x) 204 200 199 198 211 (6x) 214 (2x) 215 208 213 212 224 206 191 (2x) 205 220 201 (2x) 203 202 223 197 (2x) 221 (4x) 216 NOTE: When servicing gears or gearcase, 90-95% of old grease must be removed prior to new grease being added. Clean gear assemblies with clean, dry cloth.
PAGE 5
111 GEARCASE and MOTOR ASSEMBLY 110 109 273 145 144 (3x) 107 (2x) 103 (2x) 128 100 106 105 130 127 140 141 104 125 121 136 134 135 (2x) 276 148 277 118 DESCRIPTION OF PART NO REQ. Riving Knife (1) M5 x 8mm Set Screw, S2.5 (3) M4 x 8mm Pan Hd. T-20 Sems Screw (1) Stem (1) M5 x 16mm Cap Hd. Mach. Screw, S4 (2) M4 x 22.5mm Cap Hd. Mach.
PAGE 6
17 TABLE SAW ATTACHMENTS / ACCESSORIES 242 243 1 (2x) 2 (2x) 3 (2x) 4 5 (2x) 18 19 28 20 (2x) 8 14 21 22 23 24 6 7 261 14 24 19 20 21 22 23 25 26 27 28 246 25 27 246 26 11 260 95 (4x) 1 8 9 (4x) 2 3 4 5 6 7 9 10 242 243 244 245 96 236 12 (2x) 247 245 244 15 181 LUBRICATION 262 91 33 93 34 (2x) 36 (2x) FIG. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 PART NO.
PAGE 7
SCREW TORQUE SPECIFICATIONS FIG. PART NO. DESCRIPTION OF FASTENER WHERE USED SEAT TORQUE (KG/CM) (IN/LBS) TABLE TOP and RAIL ASSEMBLIES 47 06-55-0005 M10 Hex Nut with Nylon 52 06-82-0072 M5 x 20mm Pan Hd. Sems T-25 Nylok Screw 63 06-82-0074 M5 x 13mm Pan Hd. Sems T-25 Nylok Screw 65 06-55-0011 M6 Hex Nut 71 06-55-0006 M5 Hex Nut with Nylon 89 06-75-0011 M6 x 8mm Pan Hd.