Use and Care Manual

3
BATTERY TOOL USE AND CARE
• Recharge only with the charger specied by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of re when used
with another battery pack.
• Use power tools only with specically designated
battery packs. Use of any other battery packs may
create a risk of injury and re.
• When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal
to another. Shorting the battery terminals together
may cause burns or a re.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
cidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
• Do not use a battery pack or tool that is dam-
aged or modied. Damaged or modied batteries
may exhibit unpredictable behavior resulting in re,
explosion or risk of injury.
• Do not expose a battery pack or tool to re or
excessive temperature. Exposure to re or tem-
perature above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specied in the instructions. Charging
improperly or at temperatures outside the specied
range may damage the battery and increase the risk
of re.
SERVICE
• Have your power tool serviced by a qualied
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SPECIFIC SAFETY RULES FOR
PRESS TOOL
• Use tool only as directed. Only trained personnel
should operate tool.
• Do not use tool without press jaw installed.
Fingers could be crushed.
• Keep hands away from press jaw while tool is
in use. Fingers could be crushed.
• To reduce the risk of injury, wear safety goggles
or glasses with side shields. Inspect and discard
workpieces with cracks or wear before use.
Materials may crack or shatter.
• Use tool only with MILWAUKEE or MILWAUKEE
approved press jaws, press ttings, and pipe for
which they are designed. Other uses may cause
injury or damage to the tool, accessories, and pipes.
Leaking may result.
• Only use press jaw with a compression range
rated for this tool.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
•
WARNING
Some dust created by power sanding,
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
lter out microscopic particles.
SYMBOLOGY
Volts
Direct Current
MET Laboratories
United States and Canada
Always wear eye protection
SPECIFICATIONS
Cat. No. ..................................................... 2773-20
Volts.............................................................. 18 DC
Watts .................................................................450
Nominal Force ...........................................7200 lbs
Compression Range
Copper and Stainless ............ < Ø 4" (100 mm)
Iron Pipe and Stainless.......... < Ø 2" (50 mm)
Black Iron Pipe ...................... < Ø 2" (50 mm)
Battery Type .................................................M18™
Charger Type................................................M18™
FUNCTIONAL DESCRIPTION
1. Start button
2. Green LED
3. Red LED
4. Press jaw
5. Retaining pin
6. Release button
7. Handle
2
6
7
1
3
5
4