Service Parts List

2779-20

M18™ FORCELOGIC™ 750 MCM Crimper

Oct. 2019

54-00-2779

REVISED BULLETIN

SERVICE PARTS LIST

BULLETIN NO.

WIRING INSTRUCTION

DATE

CATALOG NO.

SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS

SERIAL

NUMBER

Drwg. 2

H53A

LUBRICATION INSTRUCTIONS PAGE 3

CUTTER HEAD SERVICE PARTS PAGE 2

U DIES and ACCESSORIES PAGE 2

TORQUE SPECIFICATIONS PAGE 3

Due to the combination of hydraulics and electronics in this tool,

service can only be performed at Milwaukee Authorized Hydraulic Repair Centers:

MILWAUKEE TOOL Central Repair

1401 Sycamore Avenue

Greenwood, MS 38930-7277

Please send your tool directly to this location for service.

Via e-Service at: www.milwaukeetool.com/e-service

questions, please call 1.800.SAWDUST (1.800.729.3878)

Visit www.milwaukeetool.com to nd your closest

Milwaukee authorized Hydraulic repair center

Return it to a MILWAUKEE factory Service Center location, freight prepaid and insured.

A copy of the proof of purchase should be included with the return product.

If you have questions please contact Milwaukee Product Service at:

Product Technical Support via phone at: 262.783.8642

Via email at: METProductSupport @milwaukeetool.com

Disassembly is not recommended and could void the warranty.

PAGE 1
BULLETIN NO. SERVICE PARTS LIST 54-00-2779 SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS M18™ FORCELOGIC™ 750 MCM Crimper 2779-20 CATALOG NO. CUTTER HEAD SERVICE PARTS PAGE 2 U DIES and ACCESSORIES PAGE 2 LUBRICATION INSTRUCTIONS PAGE 3 SERIAL NUMBER H53A REVISED BULLETIN DATE Oct.
PAGE 2
SERVICE PARTS EXPLODED VIEW 1b 1c 1d 80 1a 1e 1f 1g 1h 1c 1b 79 1a 1d 1g 1d 44a 1e 1f 1b 1b 1d 78 1a 1g 1j 1g 1a 1g 1h 1b 1d 1a 1j FIG. 1a 1b 1c 1d 1e 1f 1g 1h 1j 44a 78 79 80 PART NO. ------------------------------------------------------------------------------------------------------------------------------44-90-0028 28-25-2778 43-72-0154 14-12-0125 12-20-2780 42-55-2778 49-32-0110 DESCRIPTION OF PART NO. REQ.
PAGE 3
LUBRICATION INSTRUCTIONS NOTE Regarding parts to be lubricated: Apply a light coating of grease to all highlighted parts shown prior to installation. Reference the key for grease type. NOTE Regarding parts to receive thread locking sealant: Place one to two drops of the recommended Loctite® thread locking sealant (or the equivelant) to threads of parts shown prior to installation. ST-80 White Lithium Grease, No. 49-08-0145 243 Blue Loctite® Thread Locking Sealant, No.