Service Parts List S/N F33D

34
17
35
36
17 34
35
66
37
39
38
43
51
50
49
63
46
44 45
46 49
64
37
38
65
39
43
67
50 51
52 53
69
Rotor Holding Service Fixture
Cat. No. 61-30-0050
(For use in a vise)
Use as an aid for
the removal of the
M5 Hex Nut #31
from the rotor spindle
while preventing
damage to Rotor #39.
EXAMPLE:
Component Parts (Small #)
Are Included When Ordering
The Assembly (Large #).
0
00
31
32
39
44(4x) 45(1x)
52
53
70
31
32
33
4 5
6 7
60
61b
61c
75
62
27
(4x)
26
22
61c
61b
61d
13
7
6
4
54
17
(4x)
16(4x)
61e
5
3
1
22 32 61b
61c 61d 61e
61
33
See listing
below for
4.5” and 5”
Type 1 and
Type 27
guards.
*LUBRICATION NOTE:
When servicing the Gear Case Assembly,
90-95% of the old grease must be re-
moved prior to new grease being added.
FIG. LUBRICATION*
61 Type "Y" Grease, No. 49-08-5270,
Must Be Applied To All Gear Teeth.
M18 FUEL™ Angle Grinder with Paddle Switch & Lock-O󰀨
2780-20
F33D
54-38-7013
SEE PAGE 2
Mar. 2018
FIG. PART NO. DESCRIPTION OF PART NO. REQ.
1 44-40-0035 Flange Nut 1
3 43-34-0935 Flange Disc 1
4 --------------- Flange with Ramps 1
5 --------------- Retaining Ring 1
6 --------------- Wave Spring 1
7 --------------- O-Ring 1
13 43-54-1220 5" Type 27 Guard (Standard Equip., Shown) 1
13 43-54-1230 5" Type 1 Guard (Standard Equip., Not Shown) 1
13 43-54-1200 4.5" Type 27 Guard (Optional, Not Shown) 1
13 43-54-1210 4.5" Type 1 Guard (Optional, Not Shown) 1
16 05-78-5316 M4 x 14mm Pan Hd. Tapt. T-20 Screw 4
17 05-90-0225 Spring Washer 6
22 34-40-0180 O-Ring 1
26 42-62-0125 Side Handle 1
27 05-88-1300 M4 x 28mm Pan Hd. ST T-20 Screw 4
31 05-55-0620 M5 Hex Nut 1
32 --------------- Pinion 1
33 02-04-0620 Ball Bearing 1
34 44-66-0450 Bearing Retainer 1
35 05-78-0105 M4 x 10mm Pan Hd. Tapt. T-20 Screw 2
36 45-88-0406 Washer 1
37 --------------- FanBa󰀪e 1
38 --------------- FanBa󰀪eFoot 1
39 --------------- Rotor 1
43 02-04-0033 Ball Bearing 1
44 05-88-1200 M4 x 16mm Pan Hd. Plastite T-20 Screw 4
45 06-82-7236 4-20 x 5/8" Pan Hd. Plastite T-10 Screw 1
46 --------------- Handle Cover - Right Side 1
49 --------------- Handle Support - Left Side 1
50 --------------- Paddle Trigger 1
51 --------------- Lock-O󰀨Lever 1
REVISED BULLETIN
SERVICE PARTS LIST
BULLETIN NO.
WIRING INSTRUCTION
DATE
SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS
CATALOG NO.
MILWAUKEE TOOL ● www.milwaukeetool.com
13135W.LisbonRoad,Brookeld,WI53005
Drwg. 1
STARTING
SERIAL NO.
FIG. PART NO. DESCRIPTION OF PART NO. REQ.
52 --------------- Lock-O󰀨Spring 1
53 --------------- Lock-O󰀨Pin 1
54 49-96-7215 Spanner Wrench 1
55 12-20-2685 Service Nameplate (Not Shown) 1
56 42-55-2684 Carrying Case 1
60 14-46-6105 Flange with Ramps Assembly 1
61 14-73-0500 5/8-11 Spindle Hub Assembly with Pinion 1
61b --------------- Steel Pin 1
61c --------------- Spring 1
61d 44-20-0155 Guard Locking Tang 1
61e 05-81-0020 M3 x 5mm Pan Hd. ST T-8 Screw 1
62 14-30-1167 Gearcase Assembly 1
63 14-20-2690 Electronics Kit 1
64 31-44-0895 Housing Kit 1
65 42-14-0040 Ba󰀪eAssembly 1
66 44-86-0195 Bearing Retaining Plate Assembly 1
67 16-07-2690 Rotor Assembly 1
69 14-78-0575 Paddle Trigger Assembly 1
70 31-15-0275 Dust Cover 1
75 14-46-0241 Spring/Pin Kit 1
54
54-38-7012
«
«
«= Part number change
from previous service
parts list.