Replacement Part List
M18 FUEL™ Die Grinder
2784-20
H58A
54-22-2700
Dec. 2016
FIG. PART NO. DESCRIPTION OF PART NO. REQ.
1 48-68-0031 1/4" Collet Nut 1
2 48-66-0975 1/4" Collet 1
3 31-15-0054 Spindle Housing Cover 1
11 05-88-1200 M4 x 1.4 x 16 Pan Hd. ST T-20 Screw 4
12 06-82-7236 M3 x 1.0 x 16 Pan Hd. ST T-10 Screw 1
13 42-90-0024 Coupler Insert 1
15 06-81-5376 M4 x 1.4 x 34 Pan Hd. ST T-20 Screw 4
19 02-04-0033 Ball Bearing 1
20 42-14-0006 Bafe 1
22 31-92-0055 Slider Button 1
25 --------------- Housing Cover 1
26 31-84-0100 Slide Pole 1
28 --------------- Housing Support 1
29 31-15-0275 Dust Cover 1
30 12-20-0106 Service Nameplate 1
40 14-34-2784 Housing Assembly 1
41 16-01-2784 Rotor/Fan Housing Assembly 1
42 14-20-2784 Electronics Assembly 1
43 28-50-0401 Spindle Housing Assembly 1
44 49-96-4040 1/2" Open End Wrench 1
45 49-96-4090 11/16" Open End Wrench 1
46 42-55-2784 Blow Molded Carrying Case 1
47 14-46-0167 1/4" Collet and Nut Kit 1
REVISED BULLETIN
SERVICE PARTS LIST
BULLETIN NO.
WIRING INSTRUCTION
DATE
SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS
CATALOG NO.
STARTING
SERIAL NO.
43
1
2
3
15(4x)
22
20
19
13
26
29
25
42
11(4x)
30
12
28
41
19
40
25 28
30
46
44
45
47
1
2
EXAMPLE:
Component Parts (Small #) Are Included
When Ordering The Assembly (Large #).
0
00
MILWAUKEE TOOL
l
www.milwaukeetool.com
13135W.LisbonRoad,Brookeld,WI53005
Drwg. 1
SCREW TORQUE SPECIFICATIONS
SEAT TORQUE
FIG. PART NO. WHERE USED (KG/CM) (IN/LBS)
11 05-88-1200 Housing Cover 10-14 8.6-12.1
12 06-82-7236 Housing Cover 5-7 4.3-6.0
15 06-81-5376 Spindle Housing Cover 10-14 8.6-12.1
Prior to installing the electronics
assembly (42) into the housing support
(28), place grounding terminal over
screw boss as shown. Route ground
wire, removing as much slack as
possible. Be sure wire is pressed firmly
to the back of the wire traps.
Install the electronics assembly as
shown. Route wires around screw
bosses and into wire traps. Be sure
all components are seated
squarely and firmly in
place. Be sure there is
no interference when
installing the housing
cover (25).
Ground
Terminal
Wire Traps