Service Parts List S/N K58A

FIG. PART NO. DESCRIPTION OF PART NO. REQ.
3 45-12-0020 Insulated Boot (1)
4 31-44-2709 Top Handle (1)
5 05-88-9915 M5 x 1.23 x 25mm Pan Hd. DG T-25 Screw (2)
7 05-88-0510 M5 x 80mm Pan Hd. T-20 PT Screw (4)
9 38-50-0027 Spindle (1)
10 06-42-2400 Woodru󰀨Key (1)
11 32-05-0400 Bevel Gear (1)
12 34-40-0005 O-Ring (1)
13 28-53-0095 Spindle Mounting Hub (1)
14 02-04-2031 Ball Bearing (1)
15 34-80-2980 Retaining Ring (1)
16 06-82-5411 10-24 x .625 Pan Hd. Taptite T-25 Screw (4)
19 06-75-3155 1/4-20 x 1" Socket Head Screw-LH Thread (1)
20 34-40-1570 O-Ring (1)
21 28-53-0085 Shifting Hub (1)
22 44-86-0032 Retaining Ring (1)
23 02-02-1300 Steel Ball (2)
24 40-50-8690 Detent Spring (2)
25 43-98-0067 Shifting Knob (1)
27 32-60-0280 Bevel Pinion (1)
28 02-04-1055 Ball Bearing (1)
29 44-66-1005 Bearing Retaining Plate (1)
30 06-82-5360 1/4-20 x .625 Pan Hd. Taptite T-30 Screw (2)
31 32-44-0500 2nd Intermediate Gear Assembly - High (1)
32 06-42-0800 Woodru󰀨Key (1)
33 36-66-0300 2nd Intermediate Shaft (1)
34 42-90-0015 Shifting Ring (1)
35 43-12-0065 Drive Hub (1)
43 34-60-1450 E-Ring (1)
44 45-88-0395 Thrust Washer (4)
45 02-80-0180 Thrust Bearing (2)
FIG. PART NO. DESCRIPTION OF PART NO. REQ.
46 32-42-0200 1st Intermediate Gear (1)
47 32-60-0018 2nd Intermediate Pinion - High (1)
48 32-60-0405 2nd Intermediate Shaft (1)
50 43-44-0705 Gasket (1)
72 44-94-0012 Shifting Rod (2)
73 40-50-0067 Shifter Spring (2)
74 42-76-0281 Short Shift (1)
75 42-76-0271 Long Shift (1)
82 31-86-0010 Spacer (1)
94 14-08-0010 Clutch Hub Assembly (1)
95 14-13-0015 Diaphragm Assembly with Needle Bearings (1)
97 14-30-0505 Gearcase Assembly with Needle Bearings (1)
99 14-34-0030 Side Handle Assembly (1)
101 42-66-0055 7/16" Hex Chuck Assembly (1)\
102 06-82-2368 3.5 x 16mm Pan Hd. ST T-10 Screw (1)
5
(2x)
4
97
9
10
11
12
13
16
(4x)
14
15
101
19
20
21
22
25
102
82
45
23
(2x)
24
(2x)
48
47
74
73
(2x)
46
45
72
(2x)
50
95
75
44
32
33
34
35
44
94
43
7
(4x)
27
28
29
30
(2x)
31
3
99
Secure Top Handle (4) to the Gear
Case (97) with two Screws (5) only
after Insulated Boot (3) is installed.
‘Bearing Side’
stamped on part
Flat side towards
Clutch Hub
Assembly (94)
Flat side
towards
tool
See page three for
assembly details