Replacement Part List

Wire Routing for Side Lights and Drive Motor

Route the wires for side LED lights

and drive motor through hole here,

with the left LED wire and the motor

wire through the hole directly.

The right LED wire needs to cross

the rear baffle then go through the

hole.

Cross the wires through the plastic

part and place the wires between

PCBA plate and screw boss for

securing bracket.

Wires for side lights and drive motor Boat securing bracket

Wire Routing for Front LED Lights and Blade Motor

Route wires for the front LED lights as shown.

Be sure to place wires completely in the bottom of all wire traps.

Secure front LED light wires with 12 wire clips and screws.

Route wires from front LED lights

and blade motor through hole here.

Fasten wires together with wire tie.

LED Light

Wire Clip

& Screw

Wire

Tie

Hole