Service Parts List S/N L17A

On-Off Switch
Main PCBA
Battery Terminal
Block
Lock On/Off Shuttle
Micro Switch (for 2829S-20 only)
Wires to LED Work Light
As an aid to reassembly, take notice of wire routings and position in wire
guides and traps while dismantling tool.
Besurethatallcomponentsoftheelectronicskitareseatedrmlyand
squarely in the housing recesses.
Avoid pinched wires, be sure that all wires and sleeves
are pressed completely down in wire guides and traps.
Prior to securing the housing cover onto the housing support, be sure
that there are no interferences.
Before installing the battery, check for proper functionality of shuttle and
triggers.
Install battery and depress switch triggers to assure tool is operating
properly.
LUBRICATION NOTES:
Type 'J' Grease,
No. 49-08-4220
When servicing, remove 90-95% of the existing grease prior to installing Type 'J'.
Original grease may be similar in color but not compatible with 'J'.
Prior to reinstalling, clean gear assemblies with a clean, dry cloth. Lightly coat all
parts highlighted here with ‘J’ grease. Apply a greater amount of grease to all gear teeth.
Model 2829S-20 Shown
(For 2829-20, disregard
micro switch and
corresponding wires)