Service Parts List

M18 FUEL™ Rear Handle Circular Saw
2830-20 K43A
54-40-0830
See Page Three
FIG. PART NO. DESCRIPTION OF PART NO. REQ.
3 06-75-1010 Left Hand Blade Screw (1)
4 06-82-5314 10-24 x1/2 Pan Hd. Taptite T-25 Screw (1)
5 44-10-1080 Lower Guard Lever (1)
6 43-34-0426 Outer Blade Flange (1)
7 05-78-1005 M3.5 x 12mm Pan Hd. Phillips Machine Screw (1)
8 31-15-0002 Dust Chute (1)
9 43-34-0427 Inner Blade Flange (1)
10 05-78-5316 M4 x 14mm Pan Hd. Taptite T-20 Screw (3)
12 34-60-0860 Retaining Ring (1)
13 28-41-0102 Lower Guard (1)
14 45-14-0015 Sleeve Ring (1)
15 45-04-0485 Bumper Screw (1)
16 42-38-0224 Rubber Bumper (1)
17 06-82-5285 6-32 x 1/2 Pan Hd. Taptite T-15 Screw (13)
18 40-50-0045 Lower Guard Spring (1)
19 44-66-6310 LED Cover (1)
20 22-09-2610 LED Assembly (1)
21 45-06-0720 Felt Seal (1)
22 40-50-8046 Spindle Lock Spring (1)
23 42-42-1030 Spindle Lock Button (1)
24 44-20-1105 Spindle Lock (1)
25 44-66-6315 Exhaust Plate (1)
29 44-60-0741 Pivot Pin (1)
32 05-59-2045 Drive Nut (2)
33 42-70-0140 Bowed E-Ring (2)
34 44-10-1085 Depth Adjustment Lever (2)
35 05-85-0056 M6 x 19mm Hex Head Machine Screw (1)
37 49-96-0190 Wrench (1)
38 05-74-0986 M4 x 10mm Cap Hd. T-20 Screw (2)
39 --------------- Shoe (1)
40 45-88-0136 Washer (1)
41 06-10-0025 M6 x 33mm Pan Hd. Bevel Screw (1)
REVISED BULLETIN
SERVICE PARTS LIST
BULLETIN NO.
WIRING INSTRUCTION
DATE
SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS
CATALOG NO.
MILWAUKEE TOOL
l
www.milwaukeetool.com
13135 W. Lisbon Rd., Brookeld, WI 53005
Drwg. 2
STARTING
SERIAL NO.
EXAMPLE:
Component Parts (Small #)
Are Included When Ordering
The Assembly (Large #).
0
00
June 2019
SEE PAGE 2 FOR SERVICE
NOTES AND LUBRICATION
OF THIS TOOL
80
12
13
14
15
16
17
(2x)
19
20
25
29
10
(3x)
44
84
48
(2x)
65
(11x)
87
37
61
58
53
(2x)
59
60
63
(4x)
17
(4x)
74
85
72
38
(2x)
73
65
(2x)
3
6
9
7
8
4
5
34
33
32
41
18
35
21
17
(4x)
81
82
23
24
22
17
(3x)
32
33
34
40
42
43
58 64
65 73
86
34 40
43
32 33
41 42
83
FIG. PART NO. DESCRIPTION OF PART NO. REQ.
42 43-98-0605 Rip Fence Knob (1)
43 40-50-0650 Spring (1)
44 34-40-8001 O-Ring (1)
48 05-74-1030 M5 x 12mm Pan Hd. Taptite T-25 Screw (2)
53 05-81-1195 M3 x 8mm Pan Hd. ST T-10 Screw (2)
56 22-56-0005 Close End Connector (1)
57 06-95-6215 M5 x 14mm Pan Hd. Plastite T-20 Screw (3)
58 --------------- Handle Support- Left Side (1)
59 42-42-0345 Lock-Out Button (1)
60 40-50-1760 Spring (1)
61 23-66-5027 On-O󰀨 Switch (1)
63 05-78-1010 M3.5 x 12mm Pan Hd. T-10 Machine Screw (4)
64 --------------- Handle Cover - Right Side (1)
65 06-82-7470 #6-19 x 11/16 Pan Hd. Plastite T-15 Screw (13)
72 31-44-0005 Top Handle (1)
73 12-20-2830 Service Nameplate (1)
74 42-55-6150 Contractor Bag (1)
80 28-20-0028 Upper Guard Cover Assembly (1)
81 38-50-0305 Output Shaft Assembly (1)
82 28-14-1825 Upper Guard Gearcase with Needle Bearing (1)
83 14-74-0305 Shoe Assembly (1)
84 16-01-2820 Rotor Assembly (1)
85 14-20-0259 Electronics Assembly (1)
86 14-38-0580 Handle/Housing Assembly (1)
87 14-34-7010 Rafter Hook Assembly (1)
88 10-20-2953 Warning Label (Not Shown) (1)
89 49-90-2065 Dust Adaptor Universal (Not Shown) (1)
90 49-90-2070 Locking Hose Dust Adaptor (Not Shown) (1)