Use and Care Manual

4
FUNCTIONAL DESCRIPTION
1
5
2 3
4
6
7
8
1. Tank
2. Carry handle
3. Drain valve
4. Tank pressure gauge
5. Release valve
6. Regulator knob
7. Quick-connect coupler
8. Auto On/O󰀨 Switch
9. Intake lter
9
ASSEMBLY
WARNING
Recharge only with the charger
specied for the battery. For spe-
cic charging instructions, read the operator’s
manual supplied with your charger and battery.
Removing/Inserting the Battery
To remove the battery, push in the release buttons
and pull the battery away from the tool.
WARNING
Always remove battery before
changing or removing accessories.
To insert the battery, slide the pack into the body
of the tool. Make sure it latches securely into place.
WARNING
Only use accessories specically
recommended for this tool. Others
may be hazardous.
Installing the Intake Filter
WARNING
The intake lter must be installed
for optimal performance.
1. Turn o󰀨 the air compressor and remove the battery
pack.
2. Remove the clear plastic mu󰀪er tube from the
intake lter cap.
3. Unscrew the intake lter cap.
4. Insert the intake lter until it is fully seated.
5. Reinstall the intake lter cap and mu󰀪er tube.
•
WARNING
Some dust created by power sand-
ing, sawing, grinding, drilling, and
other construction activities contains chemicals
known to cause cancer, birth defects or other repro-
ductive harm. Some examples of these chemicals
are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
lter out microscopic particles.
SYMBOLOGY
Volts
Direct Current
Read Operator's Manual
Wear Eye Protection
Hot Surface - To reduce the risk of
burns, do not touch
Risk of Bursting
Do not expose to rain
Risk of Fire or Explosion
Tank pressure
Outlet pressure
C
US
UL Listing for Canada and U.S.
SPECIFICATIONS
Cat. No. ..................................................... 2840-20
Volts.............................................................. 18 DC
Battery Type .................................................M18™
Charger Type................................................M18™
Recommended Ambient
Operating Temperature ......................0°F to 125°F
Air Tank Capacity ........................................2 gallon
Air Pressure ........................................ 135 psi max.
Air Delivery ............................. 40 psi @ 1.7 SCFM
90 psi @ 1.2 SCFM
Noise level ...................................................68 dBA
Quick connect type ........................................... 1/4"