Operator's Manual S/N L03A

2 M18™ WIRELESS MONITOR

4. Press the PICTURE button to capture an image. The screen will ash red for a

moment conrming that the image was captured.

At the end of the session, press the RECORD button again to end and save the

video le.

2.3.3 EXPORT JOB

The EXPORT JOB allows for the copying of les from the M18™ 500GB CONTROL HUB

INTERNAL DRIVE to the CONTROL HUB THUMB DRIVE.

From within the GALLERY individual les can be exported one at a time.

From the MANAGE JOBS option, under SETTINGS entire folders of JOBS can be

EXPORTED in one session.

EXPORT JOB from the GALLERY

1. From the GALLERY select the desired video or image.

2. Use the navigation dial to select EXPORT , press the dial.

3. Use the navigation dial to select the export destination of CONTROL HUB THUMB

DRIVE, press the navigation dial. The progress indicator will appear showing the

status.

SETTINGS

CONTROL HUB THUMB DRIVE

3.942GB/29.817GB

Saving “PROJECTNAME”.

CANCEL

4. Wait for the progress indicator to run until completed.

EXPORT JOB from within the SETTINGS menu

1. From the main viewing screen, turn the navigation dial to SETTINGS , press the

navigation dial.

2. Turn the navigation dial to MANAGE JOBS, press the navigation dial.

3. Turn the navigation dial to EXPORT JOB, press the navigation dial.

4. Turn the navigation dial to select the JOB to export, press the navigation dial. The

export destination of CONTROL HUB THUMB DRIVE appears.

5. Press the navigation dial. The progress indicator will show the status.