Operator's Manual S/N L03A

45
2 M18™ WIRELESS MONITOR
1. Insert the USB stick containing the firmware update into the M18™ WIRELESS
MONITOR's USB port.
2. Turn the navigation dial to SETTINGS , press the navigation dial.
3. Turn the navigation dial to the SYSTEM UPDATE option, press the navigation dial to
enter the sub-menu.
4. Select WIRELESS MONITOR and press the navigation dial. The filename of the
update should be seen in this window.
Press the navigation dial when the update le is highlighted in red to begin the update.
SETTINGS
MTCam_monitor.bin
Update les end with a .bin le extension
5. Read and acknowledge the warning message by selecting OK.
Selecting OK will run a firmware update in
the Wireless Monitor. Please do not interrupt
the update process after it has started.
CANCEL OK
6. A progress indicator will appear showing the progress of the update.
The Wireless Monitor is updating...
58%
7. A conrmation message will appear when the update is complete, and the system will
reboot.
The Wireless Monitor will now restart in order to
complete the firmware update.
OK
8. Go to the ABOUT option in the SETTINGS menu to conrm that the rmware revision
numbers have updated.