Operator's Manual S/N L03A

3 M18™ 500GB CONTROL HUB

3. Press the navigation dial and accept the on-screen message to continue.

SETTINGS

CONTROL HUB INTERNAL DRIVE

CONTROL HUB THUMB DRIVE

Are you sure you want to delete the files on

the disk: “CONTROL HUB INTERNAL

DRIVE”

CANCEL ERASE

4. The selected drive will be formatted, and the system will return to the SETTINGS

menu.

5. Press the Back key to return to the main viewing screen.

3.5 FACTORY RESET & SYSTEM UPDATES – M18™

500GB CONTROL HUB

These two tasks can be accomplished by using the M18™ 500GB CONTROL HUB and

M18™ WIRELESS MONITOR or a tablet running the Milwaukee® Pipeline Inspection

App.

3.5.1 FACTORY RESET - M18™ 500GB CONTROL HUB

Performing a factory reset will reset the M18™ 500GB CONTROL HUB to the factory

defaults.

In the CONTROL HUB, the functionality that will reset to the factory default will be:

• LABELS will be erased

• VIDEO and IMAGE settings back to default :1080P

• The COMPANY NAME is removed

• SONDE frequency back to default

• LINE TRACE back to default

• SCREEN SETTINGS back to default: Hue, Brightness, Contrast, Saturation.

• UNITS of measure

1. On the M18™ WIRELESS MONITOR, turn the navigation dial to SETTINGS , press

the navigation dial. Turn the navigation dial to FACTORY RESET, press the navigation

dial to enter the sub-menu.