Operator's Manual S/N L03A

3
• Do not use a battery pack or tool that is damaged or modified. Damaged or
modied batteries may exhibit unpredictable behavior resulting in re, explosion or risk
of injury.
• Do not expose a battery pack or tool to re or excessive temperature. Exposure
to re or temperature above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not charge the battery pack or tool
outside the temperature range specied in the instructions. Charging improperly
or at temperatures outside the specied range may damage the battery and increase
the risk of re.
SERVICE
• Have your power tool serviced by a qualied repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
• Never service damaged battery packs. Service of battery packs should only be
performed by the manufacturer or authorized service providers.
SPECIFIC SAFETY RULES FOR PIPELINE INSPECTION
SYSTEMS
• Use latex or rubber gloves, goggles, face shields, protective clothing, and
respirator when chemicals, bacteria or other toxic or infectious substances are
suspected to be in a drain line. Drains may contain chemicals, bacteria and other
substances that may cause burns, be toxic or infectious or may result in other serious
personal injury.
• Practice good hygiene. Do not eat or smoke while handling or operating the tool.
After handling or operating equipment, use hot, soapy water to wash hands and
other body parts exposed to drain contents. This will help reduce the risk of health
hazards due to exposure to toxic or infectious material.
• Always check the work area before beginning a job. Do not allow cable to
contact electrical, chemical, or moving hazards.
• Do not use the cable to clear clogs or move obstructions. This is not a drain
cleaner!
• Inspect cable for wear and damage before use. Do not twist, kink or over bend
cables. Replace a worn or damaged cable before use.
• To reduce the risk of re, personal injury, and product damage due to a short
circuit, never immerse your tool, battery pack or charger in fluid or allow a
uid to ow inside them. Corrosive or conductive uids, such as seawater, certain
industrial chemicals, and bleach or bleach containing products, etc., can cause a short
circuit.
• Recharge battery packs only with the charger specified for the battery. For
specic charging instructions, read the operator's manual supplied with your charger
and battery.
• CAUTION Use care when transporting this tool when the reel and backpack are
connected. Tipping may occur.
• Always use common sense and be cautious when using tools. It is not possible
to anticipate every situation that could result in a dangerous outcome. Do not use
this tool if you do not understand these operating instructions or you feel the work is
beyond your capability; contact Milwaukee Tool or a trained professional for additional
information or training.
• Maintain labels and nameplates. These carry important information. If unreadable or
missing, contact a MILWAUKEE service facility for a free replacement.