Operator's Manual S/N L04A

2 M18™ WIRELESS MONITOR

3. Main viewing area – is the majority of the LCD and shows the raw video from the

camera or videos being played back.

4. CAMERA LIGHT – of the cameras LED's are controlled here.

5. ZOOM & PAN – allows for 4 x zooming with vertical and horizontal panning of the

video feed.

2.3.1 Using JOBS

Before creating a video or image le, you can tell the system where to store the les. This

is known as creating a NEW JOB or CONTINUE EXISTING JOB. Creating a NEW JOB

will setup a container (folder) for both video and image les to be stored in. CONTINUE

EXISTING JOB will route the recordings to a JOB folder that already exists.

The system will automatically ask which JOB to use in certain situations.

1. Whenever the system clock changes to a new day. (after 11:59PM)

2. Whenever the M18™ WIRELESS MONITOR is restarted. (turned off and on again)

3. Whenever the M18™ 500GB CONTROL HUB is restarted. (turned off and on again)

When the Record button is pressed under the above situations, the SELECT JOB List

will appear with options of: NEW JOB WITH DATE AND TIME, NEW JOB WITH NAME or

EXISTING JOB. From this point on the same JOB will be used until changed.

1. Turn the navigation dial to SETTINGS , press the navigation dial.

2. Turn the navigation dial to MANAGE JOBS, press the navigation dial to enter the sub-

menu.

The MANAGE JOBS sub-menu has ve menu options.

SETTINGS

NEW JOB WITH DATE AND TIME

NEW JOB WITH NAME

DELETE JOB

CONTINUE EXISTING JOB

EXPORT JOB

a. NEW JOB WITH DATE AND TIME - Creates a NEW JOB with the systems date

and time as the prex for all les in this folder.

b. NEW JOB WITH NAME - Creates a NEW JOB with the text title entered via the

on-screen keyboard.

c. CONTINUE EXISTING JOB – Send the new les to an EXISTING JOB previously

created.

d. EXPORT JOB – Copies the JOB from the CONTROL HUB INTERNAL DRIVE to

a CONTROL HUB THUMB DRIVE.

e. DELETE JOB – Deletes the JOB from the CONTROL HUB INTERNAL DRIVE.