Operator’s Manual

57
4 PIPELINE INSPECTION REEL
4.3 Installing the Backpack Plate
The 120' PIPELINE INSPECTION REEL comes with a backpack mounting plate which
allows the reel to be carried as a backpack. This is useful for transporting the small reel to
and from the job site. This is extremely helpful for climbing stairs or ladders.
CAUTION - Use care when transporting this tool when the reel and backpack are
connected. Tipping may occur.
1
2
3
4
The rear of 120' Pipeline
Inspection with backpack
plate installed
Backpack plate side view Backpack plate rear view
1. Release lever 2. Top mounting plate
3. Bottom retaining hooks
4. Male mounting post
Removing the backpack plate
1. Lift the release lever to unlock the backpack
plate.
2. Pull the bottom of the backplate away from the reel and
downward in one motion.