Service Parts List

M18 FUEL™ HP Grinder w/ Paddle Switch & Lock-O󰀨
2980-20
K02A
54-38-2900
SEE PAGE 2
Aug. 2019
FIG. PART NO. DESCRIPTION OF PART NO. REQ.
1 05-59-0016 5/8"-11 Fixtec Nut 1
2 43-54-1240 6" Type 27 Guard Assembly 1
3 43-34-0937 Flange Disc 1
4 05-81-0020 M3 x 5mm Pan Hd. T-8 Screw 1
5 44-20-0155 Guard Locking Tang 1
6 05-78-5316 M4 x 14mm Pan Hd. Tapt. T-20 Screw 4
7 05-90-0225 Spring Washer 6
8 14-73-0491 5/8"-11 Spindle Hub Assembly 1
9 --------------- Spring 1
10 --------------- Steel Pin 1
11 34-40-0180 O-Ring 1
12 14-30-0162 Gearcase Assembly 1
13 05-88-1300 M4 x 28mm Pan Hd. ST T-20 Screw 4
14 05-55-0620 M5 Hex Nut 1
15 -------------- Pinion Gear 1
16 02-04-0621 Ball Bearing 1
17 44-66-0450 Bearing Retainer 1
18 05-78-0105 M4 x 10mm Pan Hd. T-20 Screw 2
19 --------------- FanBa󰀪e 1
20 --------------- FanBa󰀪eFoot 1
REVISED BULLETIN
SERVICE PARTS LIST
BULLETIN NO.
WIRING INSTRUCTION
DATE
SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS
CATALOG NO.
MILWAUKEE TOOL CORPORATION
13135 W. LISBON RD., BROOKFIELD, WI 53005
Drwg. 4
STARTING
SERIAL NO.
FIG. PART NO. DESCRIPTION OF PART NO. REQ.
21 45-88-0406 Washer 1
22 16-07-2980 Rotor Assembly 1
22a --------------- Rotor 1
22b 02-04-0034 Ball Bearing 1
23 14-20-2980 Electronics Assembly
Consisting of: Stator, Switch, PCBA and
Battery Terminal Connector Block 1
24 31-15-0277 Dust Cover 1
25 43-84-0207 Rapid Stop Plate 1
27 06-82-2025 M3.5 x 16mm Pan Hd. ST T-10 Screw 7
28 14-78-0535 Paddle Trigger Assembly 1
29 --------------- Right Housing Halve - Cover 1
30 --------------- Left Housing Halve - Support 1
31 42-62-0125 Side Handle Assembly 1
40 12-20-0139 Service Nameplate 1
41 31-44-2980 Housing Kit 1
43 42-14-0040 Ba󰀪eAssembly 1
44 44-86-0195 Bearing Retaining Plate Assembly 1
45 50-55-3560 Medium FUEL Contractor Bag 1
46 49-96-0014 Spanner Wrench 1
47 23-38-0065 Resistor Assembly 1
13
(4x)
14
15
16
17
7
(2x)
18
(2x)
19
20
22a
22b
29
28
11
21
5
31
10
9
7(4x)
6(4x)
4
2
3
1
46
25
30
24
40
27
(7x)
12
16
4 5 9
10 11 15
8
7 17
18
44
43
19
20
21 22a
22b
22
27 29
30 40
41
23
47
47
Rotor Holding Service Fixture
Cat. No. 61-30-0050
(For use in a vise)
Use as an aid for
the removal of the
M5 Hex Nut #14
from the rotor spindle
while preventing
damage to Rotor #22a.
EXAMPLE:
Component Parts (Small #)
Are Included When Ordering
The Assembly (Large #).
0
00
14
15
22a
*LUBRICATION NOTE:
When servicing the Gear
Case Assembly, 90-95% of
the old grease must be re-
moved prior to new grease
being added.
FIG. LUBRICATION*
8,15 Type "Y" Grease,
No. 49-08-5270,
Must Be Applied To
All Gear Teeth.
12 Place 19g ± 0.5
(approx. 5/8 oz) of
“Y” grease in gear
cavity of gearcase.
45
Note:
When changing #8 14-73-0491,
make sure to use new #15 Pinion
Gear associated in the assembly.