Use and Care Manual

ManualsBrandsMilwaukee ManualsOtherM18 FUEL 18-Volt Lithium-Ion Brushless Cordless Hammer Drill, Impact Driver Combo Kit with Free Multi-Tool, PACKOUT Case

1

Connect ground wire

terminal to gear case

as shown.

Connector terminals joining

gear case assembly to PCBA

of the electronics assembly are

to be tucked into channel as

shown with wires placed

down into wire traps.

Watch for pinched

wires here.

Be sure that all mechanical and elec-

trical components are placed rmly

and squarely in the corresponding

cavities of left housing halve.

Be very careful and make sure that all

wires and the wire ribbon are placed

rmly down in wire channels and

traps.

Make sure there are no interferences

when installing the right housing

halve.

ATTENTION

OBSERVE PRECAUTIONS

FOR HANDLING

ELECTROSTATIC

SENSITIVE

DEVICES

ATTENTION

OBSERVE PRECAUTIONS

FOR HANDLING

ELECTROSTATIC

SENSITIVE

DEVICES