Service Parts List

CLOSE QUARTER COPPER TUBING CUTTERS
June 2017
54-49-3161
REVISED BULLETIN
SERVICE PARTS LIST
BULLETIN NO.
DATE
CATALOG NO. 48-22-4260 1/2" Close Quarter Copper Tubing Cutter
48-22-4261 3/4" Close Quarter Copper Tubing Cutter
48-22-4262 1" Close Quarter Copper Tubing Cutter
SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS
EXAMPLE:
Component Parts
(Small #) Are Included
When Ordering The
Assembly (Large #).
0
00
MILWAUKEE TOOL
l
www.milwaukeetool.com
13135 W. Lisbon Road, Brookeld, WI 53005
Drwg. 1
For 48-22-4260
1/2" CLOSE QUARTER COPPER TUBING CUTTER
FIG. PART NO. DESCRIPTION OF PART NO. REQ.
1 --------------- Spring (1)
2 --------------- Roller Pin (2)
3 --------------- Roller (2)
4 --------------- Blade Pin (1)
5 --------------- Pan Head Phillips Screw (2)
6 14-46-4266 Spring/Roller/Pin Service Kit (1)
7 48-22-4266 Replacement Cutter Wheel (Set of 2) (Accessory) (1)
For 48-22-4261
3/4" CLOSE QUARTER COPPER TUBING CUTTER
FIG. PART NO. DESCRIPTION OF PART NO. REQ.
1 --------------- Spring (1)
2 --------------- Roller Pin (2)
3 --------------- Roller (2)
4 --------------- Blade Pin (1)
5 --------------- Pan Head Phillips Screw (2)
6 14-46-4267 Spring/Roller/Pin Service Kit (1)
7 48-22-4266 Replacement Cutter Wheel (Set of 2) (Accessory) (1)
For 48-22-4262
1" CLOSE QUARTER COPPER TUBING CUTTER
FIG. PART NO. DESCRIPTION OF PART NO. REQ.
1 --------------- Spring (1)
2 --------------- Roller Pin (2)
3 --------------- Roller (2)
4 --------------- Blade Pin (1)
5 --------------- Pan Head Phillips Screw (2)
6 14-46-4268 Spring/Roller/Pin Service Kit (1)
7 48-22-4266 Replacement Cutter Wheel (Set of 2) (Accessory) (1)
Screws (2x)
Bottom Housing with
Left Cam pressed in
Blade
Top Housing
with Right Cam
pressed in
Blade Pin
Roller Pins (2x)
Rollers (2x)
Spring
= KIT COMPONENTS
1 2 3
4 5
6
It is recommended to use a cotton
swab to clean the cam slot on both
housing halves of any grease prior
to reinstalling blade and blade pin
Cam Slot
Cam
1
2
3
4
5
7
Right
Cam
Place leg of spring
in hole of top
housing.
Place roller pins in holes of top housing.
Place rollers over pins.
Place blade pin in front of
spring and on top of
right cam. Place
blade over pin.
Put bottom
housing in place.
Secure with screws.
Top
Housing