INSTALLATION GUIDE DRYWALL WOOD STUD BUILD YOUR SYSTEM CONCRETE
SCAN SCAN DRYWALL WALL PLATE INSTALLATION WATCH INSTALLATION VIDEO or visit https://qr.mke.tl/2w9dv MATERIALS NEEDED: n # 12 Drywall Anchors with 2" Screws n 3 /32" Drill Bit n 1 Locate & mark studs behind drywall with a pencil. 4 Follow drywall anchor manufacturer’s instructions to install anchors. For any markings that fall on studs pre-drill holes with a 3/32" drill bit. 7 Repeat process to add additional plates and fully customize your shop.
SCAN SCAN WOOD STUD WALL PLATE INSTALLATION WATCH INSTALLATION VIDEO or visit https://qr.mke.tl/23m82 MATERIALS NEEDED: n 1/4" x 1-1/4" Lag Bolts n #8 x 2-1/2" Flat Head Wood Screws n 3/32" Drill Bit 1 Have a partner hold up plywood backer in desired location and align it so it is in the center of a stud. Ensure plywood is level. 4 Large Wall Plates require the 10 identified fastening points and Compact Wall Plates require the 5 identified points. Mark these holes with a pencil.
SCAN SCAN CONCRETE WALL PLATE INSTALLATION WATCH INSTALLATION VIDEO or visit https://qr.mke.tl/26sgs MATERIALS NEEDED: n 1/4" x 1-1/4" Concrete Anchors* n 3/16" Masonry Bit n 1 Hold Wall Plate in desired location. Ensure plate is level. 4 Using 1/4" x 1-1/4" concrete anchors, fasten the plate to the wall. 5/16" Nut Driver n Level n Hammer Drill n I mpact Driver 2 If using a Large Wall Plate, mark the 10 identified fastening points with a pencil.
