Instructions / Assembly

DRY WALL
WALL PLATE INSTALLATION
INSTALLATION
VIDEO
WATCH
SCAN
SCAN
or visit https://qr.mke.tl/2w9dv
1
Locate & mark studs behind
drywall with a pencil.
6
Slide additional Wall Plates into place by
guiding the new plate’s Quick Alignment
Tabs on the top, bottom or sides into
place on the first Wall Mounted plate.
2
Hold Wall Plate in desired location.
Ensure plate is level.
4
Follow drywall anchor manufacturer’s
instructions to install anchors. For
any markings that fall on studs
pre-drill holes with a 3/32" drill bit.
5
Fasten drywall anchor manufacturer’s
recommended fasteners into the
drywall anchors and #12 x 2"
screws into 3/32" pilot holes.
7
Repeat process to add additional plates
and fully customize your shop.
3
If using a Large Wall Plate, mark the
10 identified fastening points with a
pencil. If using a Compact Wall Plate,
mark the 5 identified fastening points.
MATERIALS NEEDED:
n
#12 Drywall Anchors
with 2" Screws
n
3/32"
Drill Bit
n
Phillips #2
Driver Bit
n
Drill
Driver
n
Impact
Driver
n
Level
n
Stud
Finder
n
Safety
Glasses
n
Gloves