Instructions / Assembly

WOOD STUD
WALL PLATE INSTALLATION
1
Have a partner hold up plywood backer in
desired location and align it so it is in the
center of a stud. Ensure plywood is level.
6
Hold up plate and fasten with
1/4" x 1-1/4" lag bolts.
2
Attach plywood to studs with a
minimum of 9 wood screws.
5
Pre-drill all mounting holes
with a 3/32" bit.
7
Slide additional Wall Plates into place by
guiding the new plate’s Quick Adjustment
Tabs on the top, bottom, or sides into
place on the first Wall Mounted Plate.
8
Repeat process to add additional plates
and fully customize your shop.
3
Hold Wall Plate in desired location.
Ensure plate is level.
4
Large Wall Plates require the 10 identified
fastening points and Compact Wall
Plates require the 5 identified points.
Mark these holes with a pencil.
INSTALLATION
VIDEO
WATCH
SCAN
SCAN
or visit https://qr.mke.tl/23m82
MATERIALS NEEDED:
n
Drill
Driver
n
1/4" x 1-1/4"
Lag Bolts
n
#8 x 2-1/2"
Flat Head
Wood Screws
n
7/16"
Nut Driver
n
3/32"
Drill Bit
n
Impact
Driver
n
Level
n
1/4" x
2' x 4'
Plywood
n
Safety
Glasses
n
Gloves