Instructions / Assembly
4
Attaching the Side Handle
Attach the side handle to the rolling cabinet using
four bolts (AA) and a 10mm wrench. The side handle
can be attached to either side of the rolling cabinet,
but must match the end where the swivel casters
are installed.
NOTE: The holes in the cabinet are tapped and do
not require nuts.
AA
Installing the Casters
CAUTION
Two people may be required to
complete installation.
Do not overtighten the screws.
1. Ensure all cabinet drawers are securely locked into
place using the key lock on the rolling cabinet.
2. Lay the rolling cabinet on its back. Use the packag-
ing material to protect the nish.
3. Mount the two swivel casters with brake to the roll-
ing cabinet using four bolts (CC) and washers (BB)
per caster. The swivel casters with brake must be in-
stalled on the end of the cabinet with the side handle.
4. Mount the two rigid casters to the opposite end
of the rolling cabinet using four bolts (CC) and
washers (BB) per caster.
5. Tighten all bolts securely with a 13mm wrench.
6. Return the rolling cabinet to its upright position.
BB
CC
Installing the Chest onto the Cabinet
CAUTION
Two people may be required to
complete installation.
1. Place the top chest on top of the rolling cabinet.
NOTE: The holes in the cabinet are tapped and
do not require nuts.
ASSEMBLY
CAUTION
Be sure to follow the assembly in-
structions for the appropriate
chest/cabinet. Do not use power tools to as-
semble chest/cabinet. Tighten bolts with hand
wrenches.
Tools Required (Not Included)
Phillips
screwdriver
Safety
goggles
10 mm
Wrench
13 mm
Wrench
Hardware Included
NOTE: Items not shown in actual size. Hardware
lengths are approximate.
Hardware Item Description Quantity
AA Bolt M6 x 16L 4
BB Steel washer 16
CC Bolt M8 x 18L 16
DD Screw M4 x 12L 20
EE Screw M4 x 16L 20
Item Description Quantity
Side handle 1
5" Swivel caster
with brake
2
5" Rigid caster 2
Bracket 2
Front bumper 8
Rear bumper 2
Chest corner extrusion 2
Cabinet corner extrusion 2
Cord storage bracket 4
NOTE: Begin product assembly close to the nal
intended location of your chest/cabinet. This product
is heavy and may be dicult to move after assembly.