Instructions / Assembly

2
3
IMPORTANT SAFETY INSRUCTIONS
WARNING
READ ALL SAFETY WARNINGS
AND ALL INSTRUCTIONS. Failure
to follow the warnings and instructions may re-
sult in serious injury. Save all warnings and in-
structions for future reference.
WORK AREA SAFETY
Use the chest/cabinet and accessories in ac-
cordance with these instructions and in the
manner intended, taking into account the working
conditions. Use of the chest/cabinet for operations
different from those intended could result in a haz-
ardous situation.
Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
Fully assemble the chest/cabinet according to the
assembly instructions. Do not leave off any pieces.
Chest must be fastened by screws through
connectors after it has been placed on top of
cabinet.
Do not modify the chest/cabinet in any way. Use
only specically recommended accessories. Drilling
holes or modifying the chest/cabinet will lower the
load capacity, which can cause the chest/cabinet to
collapse, resulting in injury.
Lock wheels when chest/cabinet is not being
moved. Unlocked wheels can allow the chest/
cabinet to move unexpectedly.
•Keep the chest/cabinet on a level surface. Do not
load, unload, or park chest/cabinet on an incline.
The chest/cabinet may become unbalanced and tip,
resulting in injury.
Always balance the chest/cabinet load to avoid
tipping. Unbalanced chests/cabinets are more likely
to tip when being moved or when using the chest/
cabinet work surfaces. Evenly distribute the weight
front to back and side to side. Place more than half
the total load weight on the bottom cabinet when pos-
sible. To help prevent the chest/cabinet from tipping,
load the product starting with the bottom drawers.
Do not exceed the maximum product weight,
including contents. Do not exceed the maximum
weight for each drawer. Overloaded chests/
cabinets can tip, collapse, or damage drawer slides.
Do not open more than one drawer at a time.
Chest/cabinet may tip, causing injury.
Keep children and bystanders away while
loading, unloading, and moving chest/cabinet.
Distractions can cause you to lose control.
Only lift the chest/cabinet according to the in-
structions in this manual. Other methods may be
dangerous, resulting in injury.
Only transport the chest/cabinet when empty.
Properly secure when transporting.
Do not mount the chest/cabinet on a truck bed
or any other moving object.
Lock both the lid and all drawers before rolling
the chest/cabinet. The drawers could come open
and make the chest/cabinet unstable and tip.
Only roll the chest/cabinet short distances by
using the handle provided.
Secure all items before rolling the chest/cabinet.
Loose items could shift, causing the chest/cabinet
to become unstable.
Do not use drawers as steps. Do not stand on the
chest/cabinet. Chest/cabinet will tip, causing injury.
Be careful when closing the chest top cover.
Remove hands before closing the top cover.
Do not use chest/cabinet in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. This equipment has internal
arcing or sparking parts. Chest/cabinet should not
be located in a recessed area or below oor level.
Chest/cabinet plugs must match the outlet.
Never modify the plug in any way. Do not use
any adapter plugs with earth (grounded) chest/
cabinet power strips. Unmodied plugs and match-
ing outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
Maintain chest/cabinet. Check for misalignment
or binding wheels, breakage or bending of drawer
slides or other parts and any other condition that
may affect the chest/cabinet's operation. Do not use
damaged chest/cabinet.
Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
Have your chest/cabinet serviced by a qualied
repair person using only identical replacement
parts. Visit a local authorized service center for
repairs. Components, such as the power strip, are
not user replaceable. This will ensure that the safety
of the chest/cabinet is maintained.
WARNING
Chemical Burn Hazard.
This device contains a
lithium button/coin cell battery. A new
or used battery can cause severe
internal burns and lead to death in as
little as 2 hours if swallowed or enters the body.
Always secure the battery cover. If it does not
close securely, stop using the device, remove
the batteries, and keep it away from children. If
you think batteries may have been swallowed
or entered the body, seek immediate medical
attention.
SYMBOLOGY
Warning
Read Operator's Manual
Electrical Shock Hazard
Do not open more than one drawer at a
time. Chest/cabinet may tip, causing injury.
Be careful when closing the chest top
cover. Remove hands before closing
the cover.
Chest must be fastened by screws
through connectors after it has been
placed on top of cabinet.
Lock wheels when chest/cabinet is not
being moved. Unlocked wheels can
allow the chest/cabinet to move
unexpectedly.
Do not use drawers as steps. Chest/
cabinet may tip, causing injury.
FPO
Lock both the lid and all drawers before
moving the chest/cabinet.
SPECIFICATIONS
Two-slide drawer capacity ...........150 lbs. (68.0 kg)
Four-slide drawer capacity ........300 lbs. (136.0 kg)
Total capacity ......................... 3000 lbs. (1360.8 kg)
AC input volts ....................................................120
Hertz ....................................................................60
Watts ...............................................................1875
Max operating temperature .............221
°F
(105
°C)
FUNCTIONAL DESCRIPTION
1
15
4
14
9
6
1. Top chest
2. Utility hook
3. Chest mat
4. Tool hanger
5. Cabinet mat
6. Bottle opener
7. Cabinet corner
extrusion
8. Digital lock*
9. Front bumper
10. Rigid caster
11. Rolling cabinet
12. Tool organizer
13. Drawer slide
14. Swivel caster
with brake
15. Shelf hinge bracket
16. Storage shelf
2
3
20
5
23
8
27
17. Rear bumper
18. Charger mounts
19. Power strip
(14 AWG, 1.8 m)
20. Cord storage
bracket
21. Side handle
22.Grommet
23. Bracket
24. Paper towel holder
bracket
25. Paper towel holder
rod
26. Chest corner
extrusion
27. Gas lift strut
10
18
16
13
19
21
24
25
17
7
26
12
*See digital lock user manual for assembly and
operation instructions.
22
11