Service Parts List

1/4" Socket Drive Replacement Kit No. 14-46-1125
FIG. PART NO. DESCRIPTION OF PART NO. REQ.
1 --------------- 1/4" Pawl (1)
2 --------------- 1/4" Steel Cover (1)
3 --------------- 1/4" Handle (1)
4 --------------- O-Ring for 1/4" Cover (1)
7 --------------- 1/4" Pawl Pin (1)
9 --------------- Screw (2)
11 --------------- O-Ring for 1/4" Square Drive (1)
12 --------------- Spring for 1/4" Pawl (1)
13 --------------- 1/4" Square Drive (1)
15 14-46-1125 1/4" Socket Drive Replacement Kit (1)
58-22-1137 Instruction Sheet (1)
3/8" Socket Drive Replacement Kit No. 14-46-1137
FIG. PART NO. DESCRIPTION OF PART NO. REQ.
1 --------------- 3/8" Pawl (1)
2 --------------- 3/8" Steel Cover (1)
3 --------------- 3/8" Handle (1)
4 --------------- O-Ring for 3/8" Cover (1)
7 --------------- 3/8" Pawl Pin (1)
9 --------------- Screw (2)
11 --------------- O-Ring for 3/8" Square Drive (1)
12 --------------- Spring for 3/8" Pawl (1)
13 --------------- 3/8" Square Drive (1)
15 14-46-1137 3/8" Ratchet Service Kit (1)
58-22-1137 Instruction Sheet (1)
No. 48-22-9038 3/8" Socket Ratchet
Wrench Shown
9
2
11
13
4
3
1
7
12
1 2 4 7
9 11 12 13
15
1. Place pawl spring into pawl pin.
Insert pawl spring/pin into cavity
of handle.
2. Carefully depress spring/pin
(being sure not to bend spring)
and install pawl as shown.
3. Place pressure on pawl to
maintain spring compression
and install the square drive.
4. Install square drive o-ring, cover
o-ring and steel cover. Secure
with two machine screws. Check
for proper functionality of square
drive.
3
2
1
Square Drive
Pawl
Pawl Pin/Spring
Be very careful and
be sure not to force
pin and spring into
cavity. Spring can be
bent easily if pawl is
installed carelessly.
Steel
Cover
Screws
Handle
4