OPERATOR'S MANUAL Cat. no. M18 BPFPWS Cat. no. M18 BPFPCCS M18 BPFPCS Cat. No. M18 BPFPCCS, M18 BPFPCS, M18 BPFPWS, 491628PS, 491628CS, 491628WS M18TM SWITCH TANK CONCRETE CHEMICAL TANK SPRAYER, WATER TANK SPRAYER, CHEMICAL TANK SPRAYER WARNING To reduce the risk of injury, user must read and understand operator's manual.
• Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second. • Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. • If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.
•Do not expose a battery pack or tool to fire or components before each use. Check for excessive temperature. Exposure to fire or cracked and deteriorated hoses, leaks, clogged nozzles, and missing or damaged temperature above 130°C (265°F) may cause parts. If damaged, have the power tool explosion. repaired before use. Many accidents are •Follow all charging instructions and do not charge the battery pack or tool outside the caused by poorly maintained power tools.
SPECIFICATIONS FUNCTIONAL DESCRIPTION Cat. No............... M18 BPFPCCS, M18 BPFPCS, M18 BPFPWS Volts.......................................................... 18V DC Battery Type................................................ M18TM Charger Type............................................... M18TM Recommended Ambient Operating Temperature................ 0°C to 51°C Tank Capacity................................................ 15 L Dry Weight: M18 BPFPCCS, M18 BPFPCS................ 7.75 kg M18 BPFPWS..
o reduce WARNING Talways the risk of injury, wear personal protective equipment (PPE) according to the chemical manufacturer's instructions. Always wear eye protection. Always ensure battery compartment latch is securely closed before use. Ensure trigger handle lock-on is not engaged before turning ON tool. Turning the Sprayer ON/OFF 1. Install the battery pack. Close and latch the battery compartment. 2. To turn the sprayer ON, press the ON/OFF switch to "I". The Power LED will light green. 3.
APPLICATIONS pack and charger to a MILWAUKEE® service facility for inspection. If the tool does not start or operate at full power with a fully charged battery pack, clean the contacts on the battery pack. If the tool still does not work properly, return the tool, charger and battery pack, to a MILWAUKEE® service facility for repairs. reduce the risk of personal WARNING To injury and damage, never immerse your tool, battery pack or charger in liquid or allow a liquid to flow inside them.
To Clean: 1. Ensure the battery door is closed securely. 2. Remove the tank from the base and set on a level surface away from the base to prevent exposing the base to harsh chemicals. 3. Remove the tank and fill it about one-third full with clean water. A small amount of mild household detergent may be added. Replace the cap and gently slosh the water around the tank. 4. Install the tank and spray the water until the tank has been emptied.
WARRANTY - AUSTRALIA and NEW ZEALAND Please refer to Australian and New Zealand warranty supplied with tool. This warranty applies only to product sold in Australia and New Zealand. SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE®prides itself in producing a premium quality product that is Nothing But Heavy Duty®. Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE® dealer.