Specifications

ManualsBrandsMilwaukee ManualsDo-It-Yourself tools5335

Milwaukee Tool

Heavy-Duty Demolition Hammer

Model Numbers: 5335

Safety Instructions

GENERAL SAFETY RULES

1. Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.

2. Do not operate power tools in explosive atmospheres, such as in the presence of flam-

mable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.

3. Keep bystanders, children, and visitors away while operating a power tool. Distractions

can cause you to lose control. Protect others in the work area from debris such as chips and

sparks. Provide barriers or shields as needed.

4. Grounded tools must be plugged into an outlet properly installed and grounded in

accordance with all codes and ordinances. Never remove the grounding prong or modify

the plug in any way. Do not use any adapter plugs. Check with a qualified electrician if

you are in doubt as to whether the outlet is properly grounded. If the tools should electri-

cally malfunction or break down, grounding provides a low resistance path to carry electricity

away from the user.

5. Double Insulated tools are equipped with a polarized plug (one blade is wider than the

other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in

the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a

polarized outlet. Do not change the plug in any way. Double insulation eliminates the

need for the three wire grounded power cord and grounded power supply system.

Page 1

RenTrain INC

WARNING!

WORK AREA

ELECTRICAL SAFETY

READ AND UNDERSTAND ALL INSTRUCTIONS

Failure to follow all instructions listed below may result in

electric shock, fire and/or personal injury.

Summary of content (7 pages)

PAGE 1
Milwaukee Tool Heavy-Duty Demolition Hammer Model Numbers: 5335 Safety Instructions WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS Failure to follow all instructions listed below may result in electric shock, fire and/or personal injury. GENERAL SAFETY RULES WORK AREA 1. Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. 2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
PAGE 2
6. Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded. 7. Don't expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. 8. Do not abuse the cord. Never use the cord to carry the tools or pull the plug from an outlet. Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged cords immediately.
PAGE 3
18. Do not use tool if switch does not turn it on or off. Any tool that cannot be controlled with the switch is dangerous and must be repaired. 19. Disconnect the plug from the power source before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally. 20. Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users. 21. Maintain tools with care.
PAGE 4
tion activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemcals are: lead from lead-based paint crystalline silica from bricks and cement and other masonry products aresenic and chromium from chemically-treated lumber. Your risk from these exposures varies, depending on how often you do this type of work.
PAGE 5
GROUNDING Improperly connecting the grounding wire can result in the risk of electric shock. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the tool. Never remove the grounding prong from the plug. Do not use the tool if the cord or plug is damaged. If damaged, return it immediately to your WARNING! local rental center to have it repaired by a MILWAUKEE service facility before use.
PAGE 6
EXTENSION CORDS Grounded tools require a three wire extension cord. Double insulated tools can use either a two or three wire extension cord. As the distance from the supply outlet increases, you must use a heavier gauge extension cord. Using extension cords with inadequately sized wire causes a serious drop in voltage, resulting in loss of power and possible tool damage. Refer to the table shown to determine the required minimum wire size.
PAGE 7
FUNCTIONAL DESCRIPTION 3 1. 2. 3. 4. 5.