Specifications

18. Do not use tool if switch does not turn it on or off. Any tool that cannot be controlled

with the switch is dangerous and must be repaired.

19. Disconnect the plug from the power source before making any adjustments, changing

accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the

tool accidentally.

20. Store idle tools out of reach of children and other untrained persons. Tools are danger-

ous in the hands of untrained users.

21. Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools

with sharp cutting edge are less likely to bind and are easier to control. Do not use a damaged

tool. Tag damaged tools "Do not use" until repaired.

22. Check for misalignment or binding of moving parts, breakage of parts, and any other

condition that may affect the tool's operation. If damaged, have the tool serviced before

using. Many accidents are caused by poorly maintained tools.

23. Use only accessories that are recommended by the manufacturer for your model.

Accessories that may be suitable for one tool, may become hazardous when used on another

tool.

24. Tool service must be performed only by qualified repair personnel. Service or mainte-

nance performed by unqualified personnel could result in a risk of injury.

25. When servicing a tool, use only identical replacement parts. Follow instructions in the

Maintenance section of this manual. Use of unauthorized parts or failure to follow

Maintenance Instructions may create a risk of electric shock or injury.

1. Hold tool by insulated gripping surfaces when performing an operation where the cut-

ting tool may contact hidden wiring or its own cord. Contact with a "live" wire will make

exposed metal parts of tool "live" and shock the operator.

2. Keep hands away from all cutting edges and moving parts.

3. Maintain labels and nameplates. These carry important information. If unreadable or miss-

ing, contact a MILWAUKEE Service facility for a free replacement.

4. Warning! Some dust created by power sanding, sawing, grinding, drilling and other costruc-

Page 3

RenTrain INC

SERVICE

SPECIFIC SAFETY RULES