OPERATOR'S MANUAL MANUEL de L'UTILISATEUR MANUAL del OPERADOR Catalog No. No de Cat. Catálogo No. 6223 6225 BAND SAW SCIE À RUBAN SIERRA CLINTA Catalog No. No de Cat. Catálogo No. 6230 6236 DEEP CUT BAND SAW SCIE À RUBAN PORTATIVE SIERRAS CLINTA DE CORTE PROFUNDO TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S MANUAL. AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET BIEN COMPRENDRE LE MANUEL DE L'UTILISATEUR.
GENERAL SAFETY RULES WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS. WORK AREA 1. Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. 2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes. 3.
SPECIFIC SAFETY RULES 1. Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a “live” wire will make exposed metal parts of tool “live” and shock the operator. 2. Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free replacement. 3.
GROUNDING EXTENSION CORDS WARNING! Improperly connecting the grounding wire can result in the risk of electric shock. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the tool. Never remove the grounding prong from the plug. Do not use the tool if the cord or plug is damaged. If damaged, have it repaired by a MILWAUKEE service facility before use.
TOOL ASSEMBLY WARNING! To reduce the risk of injury, always unplug tool before attaching or removing accessories or making adjustments. Use only specifically recommended accessories. Others may be hazardous. Changing Blades 1. UNPLUG THE TOOL BEFORE REMOVING OR INSTALLING BLADES. 2. Turn the tension lock handle located on the front of the saw 180° counterclockwise. This releases the tension on the blade for easy removal. 3. Remove the blades from the pulley first and then from the guides. 4.
OPERATION WARNING! To reduce the risk of injury, wear safety goggles or glasses with side shields. Unplug the tool before changing accessories or making adjustments. Typical Application (Fig. 2 & 3) 1. Keep the blade off the workpiece until the motor has reached the selected speed. 2. Start cutting on a surface where the greatest number of teeth will be in contact with the workpiece at one time (Fig 2). Fig. 2 Two Speed Switch (Cat. Nos.
MAINTENANCE WARNING! To reduce the risk of injury, always unplug your tool before performing any maintenance. Never disassemble the tool or try to do any rewiring on the tool's electrical system. Contact a MILWAUKEE service facility for ALL repairs. Maintaining Tools Keep your tool in good repair by adopting a regular maintenance program. Before use, examine the general condition of your tool. Inspect guards, switches, tool cord set and extension cord for damage.
RÈGLES DE SÉCURITÉ GÉNÉRALES AVERTISSEMENT! VOUS DEVEZ LIRE ET COMPRENDRE TOUTES LES INSTRUCTIONS. Le non-respect, même partiel, des instructions ci-après entraîne un risque de choc électrique, d'incendie et/ou de blessures graves. CONSERVEZ CES INSTRUCTIONS. AIRE DE TRAVAIL 1. Veillez à ce que l’aire de travail soit propre et bien éclairée. Le désordre et le manque de lumière favorisent les accidents. 2.
RÈGLES DE SÉCURITÉ PARTICULIÈRE 1. Tenez l’outil par ses parties isolées lorsqu’il y a risque de contact de l’outil avec des fils sous tension ou même, le cordon de l’outil. Le contact d’une partie métallique de l’outil avec un fil sous tention comporte un risque de choc électrique. 2. Entretenez les étiquettes et marqies di fabricant. Les indications qu'elles contiennent sont précieuses.
CORDONS DE RALLONGE MISE À LA TERRE AVERTISSEMENT! Si le fil de mise à la terre est incorrectement raccordé, il peut en résulter des risques de choc électrique. Si vous n’êtes pas certain que la prise dont vous vous servez est correctement mise à la terre, faites-la vérifier par un électricien. N’altérez pas la fiche du cordon de l’outil. N’enlevez pas de la fiche, la dent qui sert à la mise à la terre. N’employez pas l’outil si le cordon ou la fiche sont en mauvais état.
MONTAGE DE L'OUTIL AVERTISSEMENT! Pour minimiser les risques de blessures, débranchez toujours l’outil avant d’y faire des réglages, d’y attacher ou d’en enlever les accessoires. L’usage d’accessoires autres que ceux qui sont spécifiquement recommandés pour cet outil peut comporter des risques. Changement Des Lames 1. DÉBRANCHEZ L'OUTIL POUR ENLEVER OU INSTALLER LES LAMES. 2. Tournez le levier de blocage de tension situé à l’avant de la scie en sens inverse-horaire à 180°.
MANIEMENT AVERTISSEMENT! Pour minimiser les risques de blessures, portez des lunettes à coques latérales. Débranchez l’outil avant de changer les accessoires ou d’effectuer des réglages. Application typique (Fig. 2 et 3) 1. Gardez la lame à l’écart du matériau jusqu’à ce que le moteur ait atteint la vitesse de rotation choisie. 2. Commencez à couper sur la partie de la surface où le plus grand nombre de dents de la lame pourront être en contact simultanément (Fig. 2). Commande à deux régimes (No.
MAINTENANCE AVERTISSEMENT! Pour minimiser les risques de blessures, débranchez toujours l’outil avant d’y effectuer des travaux de maintenance. Ne faites pas vous-même le démontage de l’outil ni le rebobinage du système électrique. Consultez un centre de service MILWAUKEE accrédité pour toutes les réparations. Entretien de l’outil Gardez l’outil en bon état en adoptant un programme d’entretien ponctuel. Avant de vous en servir, examinez son état en général.
REGLAS GENERALES DE SEGURIDAD ¡ADVERTENCIA! LEA Y ENTIENDA TODAS LAS INSTRUCCIONES El no seguir las instrucciones a continuación puede ocasionar una descarga eléctrica, incendio y/o lesiones graves. GUARDE ESTAS INSTRUCCIONES AREA DE TRABAJO 1. Mantenga el área de trabajo limpia e iluminada. Las mesas de trabajo desordenadas y las áreas con poca iluminación propician los accidentes. 2.
25. Cuando realice el servicio de mantenimiento, utilice solamente repuestos idénticos. Siga las instrucciones en la sección de mantenimiento de este manual. El uso de partes no autorizadas o el incumplimiento de las instrucciones de mantenimiento puede aumentar el riesgo de descarga eléctrica o lesiones. REGLAS ESPECIFICAS DE SEGURIDAD 1.
TIERRA EXTENSIÓNES ELÉCTRICAS ¡ADVERTENCIA! Puede haber riesgo de descarga eléctrica si se conecta el cable de conexión de puesta a tierra incorrectamente. Consulte con un electricista certificado si tiene dudas respecto a la conexión de puesta a tierra del tomacorriente. No modifique el enchufe que se proporciona con la herramienta. Nunca retire la clavija de conexión de puesta a tierra del enchufe. No use la herramienta si el cable o el enchufe está dañado.
ENSAMBAJE DE LA HERRAMIENTA ¡ADVERTENCIA! Para reducir el riesgo de lesiones, desconecte siempre la herramienta antes de fijar o retirar accesorios, o antes de efectuar ajustes. Utilice sólo los accesorios específicamente recomendados. El uso de otros accesorios puede ser peligroso. Cambio de la cinta 1. DESCONECTE LA HERRAMIENTA ANTES DE QUITAR O INSTALAR LAS CINTAS. 2. Gire 180°, en sentido inverso a un reloj, la manija del seguro de la tensión, la cual está localizada al frente de la sierra.
OPERACION ¡ADVERTENCIA! Para reducir el riesgo de lesiones, use siempre lentes de seguridad o anteojos con protectores laterales. Desconecte la herramienta antes de cambiar algún accesorio o de hacerle algún ajuste. Aplicaciones típicas (Fig. 2 y 3) 1. No apoye la cinta en el material a cortar hasta que el motor haya llegado a la velocidad prefijada. 2. Empiece a cortar en el tramo de material donde el mayor número de dientes estará en contacto con el mismo, al mismo tiempo (Fig. 2). Fig.
MANTENIMIENTO ¡ADVERTENCIA! Para reducir el riesgo de lesiones, desconecte siempre la herramienta antes de darle cualquier mantenimiento. Nunca desarme la herramienta ni trate de hacer modificaciones en el sistema eléctrico de la misma. Acuda siempre a un Centro de Servicio MILWAUKEE para TODAS las reparaciones. Mantenimiento de las herramientas Adopte un programa regular de mantenimiento y mantenga su herramienta en buenas condiciones. Antes de usarla, examine las condiciones generales de la misma.
UNITED STATES CANADA MILWAUKEE Service Service MILWAUKEE To locate the factory SERVICE CENTER or authorized service station nearest you, call Milwaukee Electric Tool (Canada) Ltd 755 Progress Avenue Scarborough, Ontario M1H 2W7 Tel. (416) 439-4181 Fax: (416) 439-6210 1-800-414-6527 TOLL FREE • NATIONWIDE Monday-Friday • 8:00 AM - 4:30 PM • Local Time In addition, there is a worldwide network of distributors ready to assist you.