Milwaukee Tool
Heavy-Duty Circular Saw
Model Numbers: 6365, 6367, 6369, 6405, 6407, 6409, 6460
Safety Instructions
1. Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
Power tools create sparks which may ignite the dust or fumes.
3. Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control.
Protect others in the work area from debris such as chips and sparks. Provide barriers or shields as needed.
4. Grounded tools must be plugged into an outlet properly installed and grounded in accordance with all codes and
ordinances. Never remove the grounding prong or modify the plug in any way. Do not use any adapter plugs. Check
with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. If the tools should electri-
cally malfunction or break down, grounding provides a low resistance path to carry electricity away from the user.
5. Double Insulated tools are equipped with a polarized plug (one blade is wider than the other). This plug will fit in a
polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician to install a polarized outlet. Do not change the plug in any way. Double insulation eliminates the
need for the three wire grounded power cord and grounded power supply system.
6. Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased
risk of electric shock if your body is grounded.
7. Don't expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
8. Do not abuse the cord. Never use the cord to carry the tools or pull the plug from an outlet. Keep cord away from
heat, oil, sharp edges or moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electric
9. When operating a power tool outside, use an outdoor extension cord marked "W-A" or "W". These cords are rated
for outdoor use and reduce the risk of electric shock.
Page 1
RenTrain INC
RenTrain INC
Failure to follow all instructions listed below may result in
electric shock, fire and/or personal injury.

Summary of content (5 pages)