Specifications

10. Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use tool while
tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may
result in serious personal injury.
11. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away
from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
12. Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with your finger on the switch or plug-
ging in tools with the switch on invites accidents.
13. Remove adjusting keys or wrenches before turning the tool on. A wrench or a key that is left attached to a rotating part
of the tool may result in personal injury.
14. Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the
tool in unexpected situations.
15. Use safety equipment. Always wear eye protection. Dust mask, nonskid safety shoes, hard hat, or hearing protection must
be used for appropriate conditions.
16. Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by
hand or against your body is unstable and may lead to loss of control.
17. Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate
for which it is designed.
18. Do not use tool if switch does not turn it on or off. Any tool that cannot be controlled with the switch is dangerous and
must be repaired.
19. Disconnect the plug from the power source before making any adjustments, changing accessories, or storing the tool.
Such preventive safety measures reduce the risk of starting the tool accidentally.
20. Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained
users.
21. Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with sharp cutting edge are less
likely to bind and are easier to control. Do not use a damaged tool. Tag damaged tools "Do not use" until repaired.
22. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the
tool's operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools.
23. Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for
one tool, may become hazardous when used on another tool.
24. Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified
personnel could result in a risk of injury.
25. When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this
manual. Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk of electric shock or injury.
Page 2
RenTrain INC
RenTrain INC
PERSONAL SAFETY
TOOL USE AND CARE
SERVICE