Specifications

1. Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden

wiring or its own cord. Contact with a "live" wire will make exposed metal parts of tool "live" and shock the operator.

2. Keep hands away from all cutting edges and moving parts.

3. Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE

Service facility for a free replacement.

4. Warning! Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemi-

cals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

 lead from lead-based paint

 crystalline silica from bricks and cement and other masonry products

 arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these

chemicals: Work in a well-ventilated area, and work with approved safety equipment such as dust masks that are specifically

designed to filter out microscopic particles.

Page 3

RenTrain INC

SPECIFIC SAFETY RULES

No Load RPM

Amps

Hertz

Symbology

Double Insulated

Canadian Standards Association

Underwriters Laboratories, Inc.

Volts Alternating Current

Catalog

Number

SPECIFICATIONS

Drywall Screw

Capacity

Volts AC

Only

No Load

RPM

Bit Hex

Size

6755-1 120 500 0-4,000 1/4” #10

6757-1 120 500 0-4,000 1/4” #10

6758-1 120 500 0-4,000 1/4” #10

Watts