Cut Sheet

10-1/4" CIRCLE SAW
58-01-0756
DATE
Nov. 2008
MILWAUKEE ELECTRIC TOOL CORP. 13135 WEST LISBON RD. BROOKFIELD, WIS.
BULLETIN
WIRING INSTRUCTIONS
TITLE
Drwg. 1
NOTE:
All leads must be held to ± 1/8".
All lead lengths are before stripping.
Terminals, Connectors and 1 or 2 End Wire Preparation
Wire
Color
Origin or
Gauge
Wire
No.
Length
WIRING SPECIFICATIONS
1 Black ----- ----- Component of the Cord Set 22-64-6515.
2 White ----- ----- Component of the Cord Set 22-64-6515.
3 Red ----- ----- Component of the Field 18-70-0550.
4 Black ----- ----- Component of the Field 18-70-0550.
5 White ----- ----- Harness Assembly 23-94-0460.
6 Blue ----- ----- Component of the Field 18-70-0550.
7 White ----- ----- Component of the PCB Assembly 14-20-0880.
8 Red ----- ----- Component of the PCB Assembly 14-20-0880.
9 Black ----- ----- Harness Assembly 23-94-0465.
10 Black ----- ----- Component of the PCB Assembly 14-20-0880.
BULK LEAD WIRE - BULLETIN NO. 58-01-0003
C1 23-74-0140 1
TERMINAL DESCRIPTION
Part No.Code
Qnty.
23-78-0170
Wire Tie
23-48-0165
Insulation
Sleeve
23-74-0140
Terminal Block
C1
Hole in
Motor Hsg.
Black
Red
White
Black
4
3
2
1
5
4
3
6
9
10
7
8
10
8
9
Position
Terminal Block
over post
Extend Cord Jacket
approx. 1/4” past
cord clamp
Black
Black
White
9
3
8
4
10
Black
Black
Black
Red
Red
BE CAREFUL AND AVOID PINCHING
WIRES BETWEEN HANDLE HALVES
WHEN ASSEMBLING.
AS AN AID TO REASSEMBLY, TAKE NOTICE OF
WIRE ROUTING AND POSITION IN WIRE GUIDES
AND TRAPS WHILE DISMANTLING TOOL.