Repair Instructions S/N J08A

ManualsBrandsMilwaukee ManualsDust Collectors & Air Filtration8 Gal. Dust Extractor

Table Of Contents

13

E.0

Disassembly

1

2

Loosen and lift the top part

of the handle with a flat-

headed screwdriver and

unscrew the lower part of

the handle (fig.1).

Unscrew the topcover

(fig.2).

TIP: Use a small flat headed

screwdriver to lift off the

WARNING: The upper section of the machine

contains live components. Contact with live

components leads to serious or even fatal

injuries.

Always disconnect the mains plug before

disassembly.

Dismount topcover and filter

TIP: Unless otherwise

stated a TX20 bit is

needed for the screws.