Service Parts List

Switch/PCBA
Black Cord Wire
Power Cord
Strain Relief
Heating
Element
NOTE:
Route all wires and sleeves from the bottom of the
Heating Element as shown. Be sure all wires are
routed under the Heating Element. Be sure those
wires are routed behind the Motor and Fan and
below the screw boss.
When replacing the Power Cord, solder ‘Black’ lead
to the upper position on the PCBA marked ‘ACL”.
Solder the ’White’ lead to the lower position on the
PCBA marked ‘ACN”.
White Cord Wire