DD2-160 XE Original instructions
ENGLISH 2 1 2 3 Picture section with operating description and functional description 4 Text section with Technical Data, important Safety and Working Hints and description of Symbols 16 4 19 4 22 4 25 4 28 4 31 4 34 4 37 4 40 4 43 4 46 4 49 4 52 4 55 4 58 4 61 4 64 4 67 4 70 4 73 4 76 4 79 4 82 4 85 4 88 4 91 4 94 3
15 10 14 9 12 11 8 6 4 5
1 1 2 2 30° 30° 30° 3 6 3 7
1 START STOP 2 Handle (insulated gripping surface) 3 START 4 8 STOP 9
ø 80 mm - ø 162 mm ø 32 mm - ø 90 mm 10 11
1 1 1 2 2 3 2 1 3 4 2 12 13
1 1 Accessory Accessory 2 2 3 3 4 14 15
TECHNICAL DATA DIAMOND DRILL DD2-160 XE (240V) DD2-160 XE (110V) Production code..................................................................... .......................3687 06 05 ................. 3687 01 05... ...000001-999999 ...000001-999999 Rated input ............................................................................ .......................1500 W ......................... 1100 W Output .................................................................................... ..............
MAINTENANCE SYMBOLS The ventilation slots of the machine must be kept clear at all times. If the machine is mainly used for percussion drilling, regularly remove collected dust from the chuck. To remove the dust hold the machine with the chuck facing down vertically, and completely open and close the chuck. The collected dust will fall from the chuck. It is recommended to regularly use cleaner for the clamping jaws and the clamping jaw borings.
Copyright 2021 Techtronic Industries GmbH Max-Eyth-Str. 10 71364 Winnenden Germany +49 (0) 7195-12-0 www.milwaukeetool.eu Techtronic Industries (UK) Ltd Fieldhouse Lane Marlow Bucks SL7 1HZ UK (01.