Instruction Manual

12 13
ISHL-LED
..................... 4776 37 02...
...000001-999999
.............................8 h
.............................6 h
...........................10 h
...........................40 h
.............................4 h
.........................155 lm
.........................235 lm
.........................155 lm
...........................25 lm
.........................310 lm
...........................80
.......................4000 K
..........................4,5 V (3x1,5V)
............ LR03 / AAA
.................-20 ... 40 °C
........................0,15 kg
........................... IP 64
TECHNICAL DATA HEADLIGHT
Production code.....................................................................
Lighting time
Spot Mode High ..................................................................
Flood Mode High ................................................................
Flood Mode Med .................................................................
Flood Mode Low .................................................................
Hybrid Mode .......................................................................
Luminus fl ux
Spot Mode High ..................................................................
Flood Mode High ................................................................
Flood Mode Med .................................................................
Flood Mode Low .................................................................
Hybrid Mode .......................................................................
Colour rendering index (CRI).................................................
Colour temperature................................................................
Battery voltage.......................................................................
Battery type ...........................................................................
Recommended ambient operating temperature ....................
Weight according EPTA-Procedure 01/2014 .........................
Protection class .....................................................................
Properly dispose of used batteries immediately.
Battery acid may leak from damaged batteries under
extreme load or extreme temperatures. In case of contact
with battery acid wash it off immediately with soap and
water. In case of eye contact rinse thoroughly for at least
10 minutes and immediately seek medical attention.
Warning! To reduce the risk of fi re, personal injury, and
product damage due to a short circuit, never immerse your
tool, battery pack or charger in fl uid or allow a fl uid to fl ow
inside them. Corrosive or conductive fl uids, such as
seawater, certain industrial chemicals, and bleach or
bleach containing products, etc., can cause a short circuit.
SPECIFIED CONDITIONS OF USE
The headlight is intended to be used light independent use
away from mains supply. The headlight is especially
designed for head mounting.
The batteries shall not be removed or replaced in a
hazardous area.
The battery compartment shall not be opened in a
hazardous area.
Only the following battery models are permitted to be used
in conjunction with this product: Duracell MN2400,
Energizer E92
All Batteries used in the equipment shall be of the same
manufacturer.
Do not use this product in any other way as stated for
normal use.
WARNING Read all safety warnings, instructions,
illustrations and specifi cations provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
SAFETY INSTRUCTIONS HEAD LIGHT
Warning: Do not direct the light beam at persons or
animals and do not stare into the light beam yourself (not
even from a distance). Staring into the light beam may
result in serious injury or vision loss.
This lamp is intended for use in explosive atmospheres.
Use the product only within the specifi ed range of ambient
temperature.
Always confi rm the ratings of this product with the known or
potentially hazardous environment in which it will be used.
The product should be inspected on a regular basis for
visible damage. The integrity of the product housing shall
be verifi ed. If the product shows any sign of damage or
defect the lamp must be switched off and removed from the
explosive atmosphere immediately.
Maintain labels and nameplates. These carry important
information. If unreadable or missing, contact a
MILWAUKEE service facility for a free replacement.
Use only identical replacement parts. Other parts or
substitutions may impair this products intrinsic safety.
The light source of this luminaire is not replaceable; when
the light source reaches its end of life the whole luminaire
shall be replaced.
SAFETY INSTRUCTIONS BATTERY
This tool is designed to be powered by 3 LR03 / AAA
batteries properly inserted into the instrument. Do not
attempt to use with any other voltage or power supply.
Do not leave batteries within the reach of children.
Do not mix new and used batteries. Do not mix brands (or
types within brands) of batteries.
Only use Energizer E92 or Duracell MN2400 batteries.
If the light will not be used for a long time, remove the
batteries as a protection against corrosion.
Do not use rechargeable batteries.
To prevent the risk of fi re or explosion, do not open battery
compartment in a hazardous atmosphere. Only change
batteries in known non-hazardous areas.
Install batteries according to polarity (+ / –) diagrams.
ENGLISH ENGLISH
EC DECLARATION OF CONFORMITY
We declare as the manufacturer under our sole
responsibility that the product described under “Technical
Data” fulfi lls all the relevant regulations and the directives
2011/65/EU (RoHS), 2014/30/EU, 2014/34/EU and the
following harmonized standards have been used:
IEC 60079-0 Ed. 7
IEC 60079-11 Ed. 6
EN IEC 60079-0:2018
EN 60079-11:2012
EN IEC 55015:2019+A11:2020
EN 61547:2009
EN IEC 63000:2018
The notifi ed body performed EU-type examination,
performed quality assurance and issued the certifi cate.
Notifi ed Body:
UL International Demko A/S,
Borupvang 5A
2750 Ballerup, Denmark
Notifi ed Body No.: 0539
Certifi cation-No.: UL 20 ATEX 2425
Certifi cation-No.: IECEx UL 20.0097
II 1 G Ex ia IIC T4 Ga
Winnenden, 2022-09-26
Alexander Krug Thomas Henkelmann
Managing Director IECEx / ATEX Authority
Authorized to compile the technical fi le
Techtronic Industries GmbH
Max-Eyth-Straße 10
71364 Winnenden
Germany
MAINTENANCE
The light source of this luminaire is not replaceable; when
the light source reaches its end of life the whole luminaire
shall be replaced.
Use only Milwaukee accessories and spare parts. Should
components need to be replaced which have not been
described, please contact one of our Milwaukee service
agents (see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered.
Please state the machine type printed as well as the
six-digit No. on the label and order the drawing at your
local service agents or directly at: Techtronic Industries
GmbH, Max-Eyth-Straße 10, 71364 Winnenden, Germany.
SYMBOLS
CAUTION! WARNING! DANGER!
Please read the instructions carefully before
starting the machine.
Do not stare at the operating light source.
Hazardous location lighting
IP64
Protection against dust deposit / Protection from
splashed water
Use in potentially explosive atmospheres,
according to directive 2014/34 / EU
Class III electrical protection.
Do not dispose of waste batteries, waste
electrical and electronic equipment as unsorted
municipal waste. Waste batteries and waste
electrical and electronic equipment must be
collected separately.
Waste batteries, waste accumulators and light
sources have to be removed from equipment.
Check with your local authority or retailer for
recycling advice and collection point.
According to local regulations retailers may have
an obligation to take back waste batteries and
Waste electrical and electronic equipment free
of charge.
Your contribution to re-use and recycling of
waste batteries and waste electrical and
electronic equipment helps to reduce the
demand of raw materials.
Waste batteries, in particular containing lithium
and waste Electrical and electronic equipment
contain valuable, recyclable materials, which
can adversely impact the environment and the
human health, if not disposed of in an
environmentally compatible manner.
Delete personal data from waste equipment, if
any.
European Conformity Mark
Ukraine Conformity Mark
EurAsian Conformity Mark