Bulletin

23
PAGE
4939 5445 01
Mounting the
end cover cap
1 Mount the following parts:
– interlock sleeve (6)
– damping ring (5)
– damping element (4).
2 Mount the spring ring (3) with aid
of the service tools mounting
sleeve (4931 599 102) and mounting
cone (4931 599 103):
Illustration A: Put the spring ring (3) onto
the conical part of the mounting cone (8).
Illustration B: Depress the spring ring (3)
with the smaller part of the mounting
sleeve (9) about half way down the cone.
Illustration C: Turn the mounting
sleeve (9) and depress the spring ring (3)
with the larger part of the mounting sleeve
until it engages in the groove (7) of the
driver.
3 Mount the sleeve (2).
4 Depress the sleeve (2) and mount the end
cover cap (1).
180°
A
B
C
6
3
2
1
5
4
7
8
3
9
9
17