Owner's manual

ENGLISH

WORKING IN MANUAL MODE

In manual mode the cross lasers self-leveling mechanism is disabled and the laser lines can

be set at any slope required.

Place the cross laser on a solid

ﬂ at vibration free surface or on a

tripod.

Turn the rotation dial to:

Same as in the self-leveling

mode, the cross laser will

generate 2 laser beams, but the

laser beams are interrupted

every 8 seconds.

8 sec. 8 sec. 8 sec.

Choose the beams that

you want to work with by

pushing the MODE

button.

Tilt the laser and adjust to the

desired angle and height.

To turn the Manual mode o󰀨 ,

turn the rotation dial to: