Owner's manual
9
1
2
3
4
5
6
ENGLISH
WORKING IN MANUAL MODE
In manual mode the cross lasers self-leveling mechanism is disabled and the laser lines can
be set at any slope required.
Place the cross laser on a solid
fl at vibration free surface or on a
tripod.
Turn the rotation dial to:
Same as in the self-leveling
mode, the cross laser will
generate 2 laser beams, but the
laser beams are interrupted
every 8 seconds.
8 sec. 8 sec. 8 sec.
Choose the beams that
you want to work with by
pushing the MODE
button.
Tilt the laser and adjust to the
desired angle and height.
To turn the Manual mode off ,
turn the rotation dial to:
.
or
turn the rotation dial to:
.