Owner's manual

ENGLISH

WORKING IN SELF-LEVELING MODE

In self-leveling mode the cross laser will level itself in a ± 4° range and can project a

horizontal beam, a vertical beam or both beams simultaneously + plumb dot up and down

(plumb dot only L4 CLLP).

Place the cross laser on a solid

ﬂ at vibration free surface or on a

tripod.

Turn the rotation dial to:

The cross laser will generate

2 laser beams.

(A) horizontal beam forward

(B) vertical beam forward

(D) The cross laser will generate

forward cross beam when all

beams are activated.

Choose the beams that

you want to work with by

pushing the MODE button.

If the initial level of the

cross laser is beyond ±4°

and the self-leveling

mode is activated, the

laser beams will ﬂ ash

In this case reposition the

cross laser.

Before moving the cross laser, turn the

rotation dial to:

This will lock the pendulum and

protect your cross laser.

1/4" male thread

> 4°