OPERATOR'S MANUAL Cat. No. L4 3PL REDLITHIUM® USB 3 POINT LASER WARNING To reduce the risk of injury, user must read and understand operator's manual.
• DO NOT DISASSEMBLE. Incorrect reassembly may result in the risk of electric shock, fire or exposure to battery chemicals. If it is damaged, take it to a MILWAUKEE® service facility. • BATTERY CHEMICALS CAUSE SERIOUS BURNS. Never allow contact with skin, eyes, or serious personal injury. Save all warnings and in- mouth. If a damaged battery leaks battery chemicals, use rubber or neoprene gloves to structions for future reference. •Save these instructions - This operator's manual dispose of it.
FUNCTIONAL DESCRIPTION 1. Laser apertures 2. %DWWHU\ FRPSDUWPHQW 4. $GMXVWDEOH FOHDUDQFH EUDFNHW SPECIFICATIONS Cat. No ....................................................... L4 3PL USB Input Volts ........................................... 5V DC USB Input Amps ..................................... 0.1 - 2.1 A Output Volts .................................................. 4V DC Output Amps ....................................................2.1 A REDLITHIUM® USB Batteries Volts ........................
BATTERY 2. Lift the rubber cover to expose the micro USB port. Insert the micro USB plug into the micro USB port. Users may experience longer charge times from laptops and other power sources. 3. The indicator light will display the charging status: Pulsing Red: Charging, 0-49% charged Pulsing Yellow: Charging, 50-99% charged Solid Green: 100% Charged. To charge the battery with laser in use, follow steps1-2 listed in the section above.
Horizontal Leveling Accuracy To turn on the laser and unlock the pendulum, A free measuring distance of approximately 20m on rotate the On/Off dial to the desired position. The a firm surface between two walls or structures (indicated as 'A' and 'B' below) is required for this remaining battery life will be displayed. check. WARNING Do not look directly into laser It is also suggested to mount the Laser Level to a an appropriate tripod for easy adjustment. apertures. 1.
Vertical Leveling Accuracy A free measuring distance of approximately 5m between floor and ceiling on a firm surface is A B required for this check. 1. Draw a straight line on the ceiling to use as a reference line. 2. Securely mount the tool within 30cm of the floor. 3. Turn the tool ON. 4. Position the tool so that the bottom plumb point can be seen on the floor and the centre of the top plumb point is located on the reference line on the ceiling. Allow the tool to self-level. 5.
MAINTENANCE To reduce the risk of injury, always WARNING remove the battery before performing any maintenance. Never disassemble the tool. Maintain Laser Level Maintain tools. If damaged, have the tool repaired before use. Accidents may be caused by poorly maintained tools. To reduce the risk of personal inand damage, never immerse WARNING jury them. Cleaning Keep tool handles clean, dry and free of oil or grease.
WARRANTY - AUSTRALIA and NEW ZEALAND Please refer to Australian and New Zealand warranty supplied with tool. This warranty applies only to product sold by authorised dealers in Australia and New Zealand. SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE® prides itself in producing a premium quality product that is Nothing But Heavy DutyTM. Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE® dealer.
