Safety Sheet

TTI-EMEA
Techtronic Industries GmbH
Max-Eyth-Straße 10
71364 Winnenden, Germany
Revision: 05 April 19
Rev. No.: 1.4
Safety Data Sheet
Milwaukee Lithium Ion Batteries
(battery pack with lithium ion cells)
according to 1907/2006/EC Article 31
3/12
2. HAZARDS IDENTIFICATION
2.1 Classification of the substance or mixture
Cells in lithium ion batteries are hermetically sealed and are harmless when used in compliance with the
manufacturer's instructions for use and handling.
These devices are classified as products in accordance with REACH Article 3 (3) and are therefore not
subject to the labelling requirements of hazardous substance legislation.
According to the CLP Regulation the product(s) is/are not classified as hazardous to health or the
environment.
2.2 Label elements
According to EC Regulation No. 1272/2008, labelling of the product is not obligatory.
Hazard pictogram Not required
Signal word Not required
Hazard statements Not required
2.3 Other hazards
A pressure release vent opens in the event of improper use of the battery pack in combination with electrical
load, fire or mechanical impact. If the product is damaged, the battery housing can rupture and allow the
ingredients to be released.
Corrosive vapours can be released in the event of fire.
3. COMPOSITION / INFORMATION ON INGREDIENTS
3.1 Substances
Not applicable
3.2 Mixtures
Rechargeable lithium ion battery pack
Cathode: Li, Ni, Co & Mn oxides (active substances); phosphates
Polyvinyl difluoride/SBR (binder)
Carbon (conductive material), additives, aluminium foil
Anode: Carbon (active substance)
Silicone, polyvinyl difluoride/SBR (binder), additives, copper foil
Electrolyte: Organic solvent (non-aqueous liquid), lithium salt, additives
Chemical name
CAS no.
EC / List no.
Concentration [%]
Aluminium
7429-90-5
231-072-3
0.1 – 10
Biphenyl
92-52-4
202-163-5
0.1 – 0.3
Copper
7440-50-8
231-159-6
0.1 – 10